HAI Omnistat Z-Wave Thermostat, Zoned, 1 Stage Heat/Cool, Backlit

Welcome to Home Controls December 01, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Environmental Controls • Thermostats and Zone Controls • HAI Omnistat Z-Wave Thermostat, Zoned, 1 Stage Heat/Cool, Backlit
	Thermostats and Zone Controls

HAI Omnistat Z-Wave Thermostat, Zoned,
1 Stage Heat/Cool, Backlit
HARC90BZ
PRICE: $349.95
(HARC90BZ) HAI Omnistat Z-Wave Thermostat, Zoned, <br>1 Stage Heat/Cool, Backlit

(HARC90BZ) HAI Omnistat Z-Wave Thermostat, Zoned, <br>1 Stage Heat/Cool, Backlit

QUANTITY:

HAI OMNISTAT Z-WAVE THERMOSTAT, ZONED, 1 STAGE HEAT/COOL, BACKLIT

Z-Wave Technology

OMNISTAT-Z THERMOSTAT WILL WORK WITH ANY Z-WAVE NETWORK!

The HAI Omnistat Z-Wave Thermostat for Zoned Systems is compatible with Z-Wave networks. This Thermostat features 1 stage cool, 1 stage heat with B and O terminals for master control and is designed to be used with single stage heating and cooling systems.

It features a sleek, modern case design that blends in with any décor. The large LCD display with "cool blue" LCD backlight shows time, temperature and operational mode.

The controls are easy to use, with simple raise and lower temperature keys, mode (off, heat, cool, auto) and fan keys (on, auto). The Prog key is used for programming when the thermostat's internal scheduling features are used. The Hold key maintains the current settings as long as the hold indicator is on. A "remote" indicator shows when the thermostat has been set by remote control.

The HAI Thermostat also features a multi-mode communications interface for connection to many types of home and building automation systems. This interface allows more comprehensive energy and comfort management by setting the thermostats based on occupancy and home or building modes along with traditional scheduling. Two full communications modes are available for connection to automation systems and personal computers. Two additional modes are available for simplified connection to most access control, security and time clock systems.

Note: The Omnistat-Z Heat Pump has a built-in Z-Wave™ transceiver, and will work with any Z-Wave™ network. When connecting it to an HAI controller, use the Leviton Vizia RF to RS232 Serial Bridge (Leviton part number RZC0P-1LW).

COMPREHENSIVE ENERGY MANAGEMENT

Omnistat thermostats feature advanced logic for superior temperature control, including "anticipation" for maximum comfort and uses HAI's advanced Energy Efficient Control (EEC) to minimize the use of expensive auxiliary heat. You can keep your home comfortable while managing your energy bill using the HAI Omnistat line of programmable communicating thermostats. Omnistat Thermostats will work with any of HAI's Omni-family of automation controllers. When used with an Omni-family controller, full control of Omnistat Thermostats is available on Omni consoles, OmniTouch touchscreens, telephones (with voice response) and over the Internet with HAI Web-Link II. The Omni family controller's advanced programming features add comprehensive energy management capabilities to one or more thermostats

Check out these additional products:

HAI Omnistat Thermostat, Zoned 1 Stage Heat/Cool, Backlit
HAI Omnistat Z-Wave Heat Pump, 1 Cool/2Heat, Backlit

HAI Omnistat Z-Wave Thermostat for Zoned Systems Instruction Manual (.pdf)

Features:

Large "cool blue" LCD backlight that displays time, temperature and mode.
Selectable Fahrenheit or Celsius display, AM/PM or 24 hour time format
Outdoor temperature display (when connected to Omni-family controller and using outdoor sensor)
Simple user controls for: Mode, Fan, Set, Hold, Raise and Lower Temperature.
Non-volatile program and setting memory: no batteries required for long term, maintenance-free operation.
Automatic Changeover between heating and cooling modes (can be configured for manual changeover if auto is not desired).
Heat Only and Cool Only modes.
Adjustable cycle times.
Adjustable Anticipator
System Runtime monitor (this week, last week; hours).
Filter Clean/Replace indicator reminds owner to clean filter to maintain best efficiency and performance. This reminder is based upon the time the fan has run. It indicates "Filt" on the display to suggest changing the filter. This reminder is reset by pressing the Prog key.
Compatible with systems using 24 volt (20 to 30 V) AC or DC controls.
5-1-1 programming capability: Separate schedules for Weekdays, Saturday and Sunday, with separate heat and cool settings for morning, day, evening and night. Internal scheduler can be disabled for use with automation systems.
High limit for heat setting is adjustable by installer.
Low limit for cool setting is adjustable by installer.
Uses transformer common wire.
Energy Star compliant and UL Listed.

Remote Communications:

4 communications modes, selectable during installation: 2 serial modes for connection to home automation systems, building management systems and personal computers, and 2 voltage signal modes for connection to time clocks, remote setback switches and many burglar alarm panels
Data signal is electrically isolated from heating and cooling system for superior reliability in all modes. Fully interactive with all HAI manufactured controllers, including mode, heat setting, cool setting, fan and hold settings. (Serial Mode 1)
Can communicate directly with the RS-232 port of a personal computer - no adapter required. Serial mode protocol: addressable up to 127 units, bi-directional, 1 start bit, 8 data bits, 1 stop bit NRZ. 300 baud data rate. Can communicate continuously without loss of function. Protocol is available from HAI web site. (Serial Mode 2)
Remote selection between Day and Night settings: a remote signal (12 VDC) selects between user programmed "day" and "night" settings for both heating and cooling modes. The settings can be changed by a user, but they will return to the preprogrammed ones on application (for night) or removal (for day) of the signal. Ideal for use with time clocks, building management systems, access control systems, alarm systems to set to preprogrammed temperatures when building is unoccupied. (Voltage signal mode 1)
Thermostat Override: a remote signal (12 VDC) overrides the thermostat operation and turns off the HVAC system. Removal of signal restores normal operation. Remote indicator shows that thermostat is overridden. Safety feature will turn on heat if temperature drops below 45 degrees F. (Voltage signal mode 2)