Sensaphone IMS Room Temperature Sensor with LCD Readout

Conveniently Monitor Indoor Temperature

If necessary, you can use your existing network wiring infrastructure to install the Sensaphone IMS Room Temperature Sensor with LCD Readout in a room away from the Sensaphone. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environmental input.

• Detects and displays the ambient indoor temperature
• Can be located away from the Sensaphone unit
• Fits in a standard single-gang box

Contents

• Temperature sensor
• Plastic drywall anchors
• #6 Metal tapping screws
• 1/16" hex key

IMPORTANT NOTE: This Sensaphone product is not available to ship outside the U.S.

Sensaphone Remote Monitoring Solutions

Unexpected events happen. But Sensaphone remote monitoring systems are on alert full time to notify you of threatening conditions, so you can respond quickly and prevent costly damages and disruptive downtime. From wireless capabilities to ultra-low temperature tolerant systems, you'll find the right Sensaphone for your monitoring needs. Start protecting your investments today.

• Manufacturer Part #:
• IMS-4811 (Fahrenheit)
• IMS-4813 (Celsius)
• Temperature Range:
• Fahrenheit Model: 32°F to 95°F
• Celsius Model: 0°C to 35°C
• Humidity: 5 to 90 percent RH
• Sensor Type: Solid State IC
• Accuracy:
• Fahrenheit Model: ± 3°F
• Celsius Model: ± 1.7°C
• Connector: RJ-45
• Housing: White plastic
• Dimensions: 4-3/4 x 2-7/8 x 1-3/16 inches
• Compatibility: Sensaphone IMS-4000, IMS-4000 Node, and IMS-1000
• Warranty: 3-Year

»Sensaphone IMS Room Temperature Sensor with LCD Readout Spec Sheet (.pdf)