• Home
  • Seco-Larm Enforcer IR Over HDMI Adapter

Seco-Larm Enforcer IR Over HDMI Adapter

SKU: SEMVEPN1101Q

Usually ships in 3-5 days.

$18.95

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Details

Remotely Control Your HDMI Device From Another Room

If your HDMI source (DVD player, Blu-Ray player, etc.) is in a different location than your HDMI display (HDTV, monitor, etc.), you can still control the source with a remote by adding the Seco-Larm Enforcer IR Over HDMI Adapter.

  • Adds IR remote pass-through for HDMI devices
  • Discreet design, easy installation
  • Compatible with other Seco-Larm HDMI products

How It Works

The IR Over HDMI Adapter consists of two adapter units, one IR transmitter, and one IR receiver. The two adapters fit onto both ends of your HDMI cable and then plug into your two HDMI components (source and display). This keeps your devices connected while enabling connection of the IR transmitter and IR receiver.

The IR receiver connects to the adapter at the HDMI display device. When you want to control the HDMI source with your remote, you will point the remote at the IR receiver, which receives IR remote control commands and passes them along the HDMI cable to the adapter at the other end, near the HDMI source. The IR transmitter (connected to the other adapter) sits in front of the source's own IR receiver and retransmits your commands to the source. The IR transmitter and receiver each have a 4.5-foot (1.45m) cord for installation versatility.

The IR Over HDMI Adapter is compatible with other Seco-Larm Enforcer products (sold separately): 4x1 HDMI Switch (MVS-AH41-01NQ), 1x4 HDMI Splitter (MVD-AH14-01NQ), and 4x4 HDMI Matrix (MVM-AH44-01YQ).

Contents

  • (2) HDMI Adapters
  • IR Transmitter
  • IR Receiver

IMPORTANT: This product is designed to extend an HDMI signal. This product is not to be used to bypass any copy protection or other content protection system. All usage of this product shall conform to the license that comes with the content.

Building A Secure Future Since 1971

So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Under the Enforcer trademark, Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether it's physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers an extensive range of dependable, cost-effective security products with a full program of service and support.

Specifications

  • Type: IR over HDMI Kit
  • Video Formats Supported: High-speed HDMI with 3D, HDCP 1.2
  • Frequency: 33~60 kHz (Dual band)
  • Dimensions:
    • IR Transmitter: 1-1/8 x 1-1/16 x 1/2 inches (30 x 18 x 12 mm)
    • IR Receiver: 1-1/8 x 1-1/16 x 1/2 inches (30 x 18 x 12 mm)
    • HDMI Adapter 1-1/8 x 7/8 x 3/8 inches (30 x 22 x 10 mm)
    • Cable: 4.5 feet (1.45m)
    • Jack: 3.5mm
  • Weight: 2.2 ounces (62g)

Downloads