X10 USB PC Receiver


Order now and we'll ship same business day (if ordered before 3 pm PST).


WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov


PC Control For X10 Devices

The USB PC Receiver sends and receives X10 commands to and from your PC. You can use it to control X10 cameras (including the Ninja and Vanguard, with the appropriate software), lights and other modules. The receiver can also receive commands from X10 motion sensors and remote controls. It works with all X10 software.

  • Control X10 modules with your PC
  • Works with all X10 software
  • Plugs into your PC's USB port

The X10 USB PC Receiver is an X10 Plug-In Transceiver

A basic wireless X10 system includes a Transmitter, a Transceiver and a Receiver – each sold separately. Wireless Transmitters are control devices that broadcast X10 radio frequency (RF) signals to Transceivers, which plugs into standard wall outlets. The Wireless Transceiver then converts the RF signal into an X10 signal and transmits it through your home's electrical wiring to X10 Receivers. When an X10 Receiver receives a command, it responds by turning a light, appliance or other electrical device On or Off, and sometimes Dim or Bright.

It's So Easy To Automate Your Home!

X10 started manufacturing home automation and security products in the late 70s and has been one of the smart home standards since its inception. X10 utilized powerline language to transmit control signals anywhere in your house over your existing 110V electrical lines, so you can control lights and appliances throughout your home without running new wires! Simply add a controller (transmitter) at one electrical outlet and add another module (receiver) at any other outlet and you have remote control of that module. Choose from plug-in, wired-in and wireless models. This enables you to have the remote and automated control of lights and appliances from anywhere on your property. The convenience and security of controlling all your lights and appliances from anywhere in your house is simple and inexpensive.


  • Power Supply: 5V DC (USB powered)
  • Size: 1-1/4(H) x 2-7/8(L) x 2-1/4(W)"
  • FCC ID: B4SCM19A