X10 SMART Wireless Keychain Remote
Arm/Disarm Security & Control Two Modules
The X10 SMART Wireless Keychain Remote allows you to arm and disarm your wireless X10 security system, turn two X10 modules on/off, and immediately activate an alarm with the "Panic" feature — all conveniently from your keychain. The remote works with the X10 PRO Base Transceiver (PAT01) or any X10 PRO Security Base (PRO2000).
- Arms/disarms an X10 wireless security system
- Turns on/off or dims-brightens two modules
- Transmits wireless RF signals
- Wireless range up to 40 feet
The remote sends wireless RF signals to your X10 wireless security console, allowing you to arm/disarm the system. You can also use the remote with an X10 wireless transceiver module to turn on/off two sequentially coded X10 PRO Modules and brighten/dim lights connected to Lamp Modules and Wall Switch Modules.
The X10 SMART Keychain Remote is an X10 Wireless Transmitter
A basic wireless X10 system includes a Transmitter, a Transceiver and a Receiver – each sold separately. Wireless Transmitters are control devices that broadcast X10 radio frequency (RF) signals to Transceivers, which plugs into standard wall outlets. The Wireless Transceiver then converts the RF signal into an X10 signal and transmits it through your home's electrical wiring to X10 Receivers. When an X10 Receiver receives a command, it responds by turning a light, appliance or other electrical device On or Off, and sometimes Dim or Bright.
X10 Makes It So Easy To Automate Your Home!
X10 began manufacturing home automation and security products in the late 70s, establishing X10 as a smart home standard. X10 utilizes powerline technology to transmit control signals anywhere in your house over your existing electrical lines, so you can control lights and appliances throughout your home without running new wires! Have complete, automated control over lights and appliances from anywhere in your home with X10.
- Dimensions: 1.5(W) x 2.2(L) x 0.5(D) inches
- Battery: 3V lithium battery CR2025 (included)