Skip to main content
  • Home
  • X10 SuperSocket Wall Receptacle

X10 SuperSocket Wall Receptacle

SKU: XTSR227

Order now and we'll ship same business day (if ordered before 3 pm PST).

$29.95

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Details

X10 Control On Top, Bottom Outlet Is Always Live!

Replace a traditional power outlet with the X10 SuperSocket Wall Receptacle Module for one X10-controlled outlet and one always-on outlet! The Receptacle Module features a controlled outlet at the top of the receptacle. The lower outlet is not controlled. Both outlets are rated at 15 amps (total). Just a lamp or light motor load into the top outlet for remote X10 control!

  • Top outlet responds to On/Off and All Units Off
  • Bottom outlet stays powered independently
  • Rated at 15A total (both outlets)
  • White wallplate included

The Receptacle Module's top outlet responds to On/Off and All Units Off commands from an X10 controller. Controlled devices may still be turned off and on with their own switches. (The X10 module is built-in, so X10 Lamp Modules are not necessary for X10 control.)

Contents

  • Wall Receptacle Module
  • White Wallplate
  • Instructions

NOTE: Does not respond to All Lights ON or Dim/Bright commands.

The X10 SuperSocket Wall Receptacle Module is an X10 Wired-In Receiver

A basic X10 system includes a Transmitter and a Receiver – both sold separately. Transmitters are control devices that send X10 signals through your home's electrical wiring to X10 Receivers. When a Receiver receives a command, it responds by turning a light, appliance or other electrical device On or Off, and sometimes Dim or Bright.

X10 Makes It So Easy To Automate Your Home!

X10 began manufacturing home automation and security products in the late 70s, establishing X10 as a smart home standard. X10 utilizes powerline technology to transmit control signals anywhere in your house over your existing electrical lines, so you can control lights and appliances throughout your home without running new wires! Have complete, automated control over lights and appliances from anywhere in your home with X10.

Specifications

  • Operating Voltage: 120VAC
  • Maximum Current: 15A total
  • Minimum Load: 40 Watts

Downloads

»X10 SR227 SuperSocket Wall Receptacle Installation Manual (.pdf)