• Home
  • X10 Dimmer Wall Switch, 500W

X10 Dimmer Wall Switch, 500W

Order now and we'll ship same business day (if ordered before 3 pm PST).

SKU: XTWS12A
$21.75

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Controls Dimmable Incandescents Up To 500W

Replace your traditional dimmer switch with the X10 Dimmer Switch (500W) to enable remote control for your dimmable wired lighting fixture. The switch controls dimmable incandescent lights up to 500 Watts. It responds to ON/OFF, BRIGHTEN/DIM, and ALL LIGHTS ON remote X10 commands, as well as local ON/OFF and BRIGHTEN/DIM control.

  • Controls incandescents up to 500 Watts
  • Works in single-pole or multi-way applications
  • Includes white and ivory rocker paddles
  • No Neutral wire required

You can use the X10 Dimmer Switch to control the connected light locally the same way you would use a traditional dimmer switch. Pressing and holding the bottom rocker (only) would toggle between brightening or dimming the light.

The X10 Dimmer Switch can be used in single-pole applications, or 3- or 4-way applications (requires companion switch, sold separately). The Dimmer Switch takes approximately 3 seconds to adjust lights from Off to Full Bright and vice versa. A power cutoff switch is located directly below the rocker switch for safe bulb changing.


Available Colors: White faceplate installed. Ivory color change kit included.

Note: Wallplate not included.

The X10 Dimmer Switch is an X10 Wired-In Receiver

A basic X10 system includes a Transmitter and a Receiver – both sold separately. Transmitters are control devices that send X10 signals through your home's electrical wiring to X10 Receivers. When a Receiver receives a command, it responds by turning a light, appliance or other electrical device On or Off, and sometimes Dim or Bright.

X10 Makes It So Easy To Automate Your Home!

X10 began manufacturing home automation and security products in the late 70s, establishing X10 as a smart home standard. X10 utilizes powerline technology to transmit control signals anywhere in your house over your existing electrical lines, so you can control lights and appliances throughout your home without running new wires! Have complete, automated control over lights and appliances from anywhere in your home with X10.

  • Power: 120VAC, 60Hz
  • Max. Resistive Load: 500 Watts Incandescent; Supports Incandescent loads with rating between 40W and 500W.
  • Approvals: CSA