Seco-Larm Enforcer Wireless IR Repeater Kit

Greatly Increase the Range of IR Control

Extend the range of remote control across IR transmissions with the Seco-Larm Enforcer Wireless IR Repeater Kit. This signal extension kit greatly increases the range of IR signals between compatible devices, allowing you to remotely operate devices such as audio/visual equipment from further distances. The Wireless IR Repeater Kit improves the performance of IR wireless transmissions and reduces RF interference with frequency hopping technology. Multiple types of IR remotes may communicate with the IR Repeater Kit.

• Increases the range of wireless IR transmission up to 656ft (200m) line of sight
• Frequency hopping technology minimizes RF interference
• Compatible with 20~60 kHz IR systems
• IR Confirmation LED indicates when IR signals are successfully received
• Compact size for easy mounting

Installation Details

The IR Repeater Kit's receiver and transmitter both must be plugged into an AC outlet. Place the transmitter facing the device to be controlled and place the receiver facing outward so it may receive signals from your IR remote. A Blue LED will shine when an IR signal is received.

In installations where you want the transmitter and receiver to be hidden, connect the included IR emitter to your receiver and place the emitter in an area to receive signals from your remote. The emitter will forward the signals to the main IR receiver which will send the signals to the IR transmitter and finally to your controlled device.

Contents

• IR Transmitter
• IR Receiver
• Wired IR receiver
• Wired IR emitter
• (2) 5VDC Power adapters
• Mounting tape for wired IR receiver
• (2) Mounting tape for wired IR emitter
• Manual

Seco-Larm Security Products

So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Under the Enforcer trademark, Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether for physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers such an extensive range of dependable, cost-effective security products with a full program of service and support.

• Manufacturer Part #: MVE-AN1W1-01Q
• LED Indicators: IR Confirmation
• Operating Voltage: 5 VDC
• IR Receiver Frequency: ±35° Off Axis
• IR Emitter Frequency: 20 to 60 kHz
• IR Emitter Angle: ±11° Off Axis
• Connector Type:
• Power: 1.3mm Coaxial center-pin-positive
• Wired IR Receiver: 1/8 in (3.5mm) TRS Mini-plug
• Wired IR Emitter: 1/8 in (3.5mm) Mono mini-plug
• Maximum Extended Range: 656 ft (200m)
• Operating Humidity: 10~90%
• Operating Temperature: -4 to 140° F (-20° to 60° C)
• Power Supply: 5VDC/500mA
• Dimensions:
• Transmitter/Receiver: 1-3/4 in x 1-3/4 in x 1-1/4 in (45 x 45 x 31 mm)
• Wired IR Receiver: 1-3/16 in x 1/4 in x 3/8 in (20 x 7 x 10 mm)
• Wired IR Emitter: 5/8 in x 3/8 in x 3/16 in (16 x 10 x 5 mm)
• Cable Length:
• Wired IR Receiver: 5 ft (1.5m)
• Wired IR Emitter: 10 ft (3m)
• RF Frequency: 915MHz
• Warranty: 2 Year Limited

»Seco-Larm MVE-AN1W1-01Q Wireless IR Repeater Kit Spec Sheet (.pdf)
»Seco-Larm MVE-AN1W1-01Q Wireless IR Repeater Kit Installation Manual (.pdf)