• Home
  • Seco-Larm Enforcer Wired Single-Channel RF Transmitter

Seco-Larm Enforcer Wired Single-Channel RF Transmitter


Order now and we'll ship same business day (if ordered before 3 pm PST).


WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov


Extend The Output of Request-To-Access Plates & Other Devices

Turn wired sensors and pushbuttons into wireless devices with the Seco-Larm Enforcer Wired Single-Channel RF Transmitter. This pre-wired transmitter is designed to extend the range of sensors, request-to-access plates and other devices by adding the option to further their signal via radio frequency. Easily adapted for many custom uses, this pendant RF transmitter can easily be adapted for a variety of custom applications from home automation control to motorized robotics. The pendant cases are easily removable for direct access and are not required for the transmitter to function, while providing for convenient and safe shelf storage.

  • Adds wireless RF transmissions to wired applications to extend the reach of selected devices
  • Transmits RF signals at 315MHz up to 500ft (150m) away
  • Over 68 billion possible codes
  • Sleek case with flashing LED transmission indicator
  • Includes 3VDC CR2032 battery
  • Compatible with SK-910RBQ, SK-910RB2Q, SK-910R3Q, SK-910R4Q, SD-862TGWSQ (all sold separately)


  • Transmitter
  • Battery (CR2032)
  • Manual

Seco-Larm Security Products

So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Under the Enforcer trademark, Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether for physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers such an extensive range of dependable, cost-effective security products with a full program of service and support.


  • Manufacturer Part #: SK-919T1-GBWQ
  • UPC: 676544021414
  • RF Frequency: 315MHz
  • Buttons: 1
  • Channels: 1
  • Possible Codes: 68 billion
  • Operating Range: Up to 500 feet (depending on installation and operating environment)
  • Wiring:
    • Two 6" wires for N.O. switch input
    • Two 6" wires for 12VDC power input
  • Battery: CR2032 battery, 3VDC
  • Dimensions: 1.24 x 2.16 x 0.31 inches (31.5 x 55 x 8 mm)
  • Credentials: RoHS
  • Warranty: 1 Year

Wiring Diagram