• Home
  • Seco-Larm Enforcer Power Supply Charger, 1.5A continuous, 2A peak

Seco-Larm Enforcer Power Supply Charger, 1.5A continuous, 2A peak

SKU: SEST24062AQ

Usually ships in 3-5 days.

$14.01

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

More Products by Seco-Larm

Details

Automatically Recharges Backup Batteries

The Seco-Larm Enforcer Power Supply Charger (1.5A continuous, 2A peak) helps ensure that your alarm system is always powered. It features a built-in charger that automatically recharges your backup batteries (not included). Protected by fused output, input polarity protection diodes, and back-up battery polarity reverse protection, the power supply charger can be used to maximize the security and efficiency of nearly any alarm or access control installation.

  • Automatically recharges backup batteries (not included)
  • Built-in short-circuit protection
  • Fused output for a regulated charge
  • Automatic switch-over to backup battery if main power is lost
  • LEDs indicate power status

Contents

  • Power Supply Charger
  • Foam Tape

Note: Rechargeable back-up battery not included.

Seco-Larm Security Products

So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Under the Enforcer trademark, Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether for physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers such an extensive range of dependable, cost-effective security products with a full program of service and support.

Specifications

Product Features

  • Switch selectable DC voltage output
  • Regulated and filtered output voltage
  • Short circuit protection
  • Thermal protection and compensation
  • Fused protection for battery charger
  • Two LEDs to indicate AC power input and DC power output status
  • Compatible with lead acid or gel-type rechargeable battery

Technical Details

  • Manufacturer Part #: ST-2406-2AQ
  • Fuse: 5A
  • DC voltage: 6, 12, 24
  • Continuous current: 1.5A
  • Peak current: 2A
  • Output current (max. charge): 6V at 200mA, 12V at 400mA, 24V at 700mA
  • Dimensions: 2-7/8 x 2-1/2 x 1-3/8 inches (73 x 64 x 35mm)
  • Warranty: 1 Year

Downloads

»Seco-Larm Enforcer ST-2406-2AQ Installation Manual (.pdf)
»Seco-Larm Enforcer ST-2406-2AQ Series Sheet (.pdf)