Seco-Larm Enforcer Motion Entry Alert
Audio Alerts For Arrivals and Exits
Know exactly when someone enters or exits a room with the Seco-Larm Enforcer CBA Wireless Motion Entry Alert. This battery-operated indoor motion sensor detects emits audible cues when changes in light levels are detected. The Motion Entry Alert is perfect for announcing visitors to homes and businesses or monitoring hallways and guarding blind corners.
- Mount next to a door or other entry point to alert when someone enters or exits
- Provides an audible alert (doorbell sound) detecting sudden changes in visible light
- Sounds for approx. 4 seconds, or as long as the sensor detects changes in visible light
- Detects changes in light levels up to 10 feet (3m) away
The entry alert can be mounted anywhere foot traffic is expected with the included mounting hardware. For use as a door annunciator, mount the alert sensor on to walls near a door frame with the sensor hole facing the door.
- Sensor with Built-In Alert
- Mounting Bracket
- (2) Mounting Screws
- (1) Adhesive Mounting Tape
NOTE: Batteries not included. For indoor use only. Designed to detect changes in visible light. Not for use in total darkness or facing a strong light.
Building A Secure Future Since 1971
So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Under the Enforcer trademark, Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether it's physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers an extensive range of dependable, cost-effective security products with a full program of service and support.
- Manufacturer Part #: AS-6111Q
- Power: 1.5VDC AAA batteries x3 (not included)
- Standby: Under 0.05mA@4.5VDC
- Active: Under 85mA@4.5VDC
- Low battery indicators: Device will repeatedly activate
- Input signal: CDS sensor
- Output signal: Doorbell sound
- Sensor range: 10 feet (3m) at 20 to 40 inches (0.5~1m) height
- Material: ABS plastic, white
- Dimensions (with bracket): 3-3/8 x 3-3/8 x 2 inches (85 x 85 x 50mm)
- Weight: 3 ounces (84g)