Seco-Larm Enforcer Magnetic Contact, Surface-Mount, 1" Gap
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Details
Standard 1" Gap Contact Sensor
The Seco-Larm Enforcer Magnetic Contact, Surface Mount (1 In. Gap) is a simple mini contact for Normally Closed (NC) circuits. The magnet and switch surface-mount up to 1-inch apart using either the included screws or the included double-sided tape. The unit's contact reed switch is SPST with iridium plating for long life. It also featured gold-plated screw terminals to ensure long-term, reliable performance.
- Miniature N.C. contact with 1-inch gap
- Surface-mount using screws or tape
- Gold-plated screw terminals ensure reliability
- Iridium-plated SPST contact reed switch
Contents
- Switch
- Magnet
- Mounting Screws
- Double-Sided Tape
Building A Secure Future Since 1971
So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Under the Enforcer trademark, Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether it's physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers an extensive range of dependable, cost-effective security products with a full program of service and support.
Specifications
- Manufacturer Part #: SM-431-TQ
- Circuit Type: N.C.
- Mounting Tabs: Yes, removable
- Material: Case: High-impact ABS plastic
- Terminals: Gold-plated
- Contacts: Iridium-plating
- Contact Rating: 0.1A@100VDC (max); 1.0A@10VDC (max); 10W (max)
- Temperature: -15 to 160° F (-25 to 70° C)
- Switch Cycles: 50 million (0.1mA@5VDC)
- Dimensions:
- Switch: 2 x 3/8 x 1/4 inches (51 x 10 x 6 mm)
- Magnet: 2 x 3/8 x 1/4 inches (51 x 10 x 6mm)
- Magnet Type: Rare-earth neodymium
- Approvals: UL, cUL, RoHS
- Warranty: Lifetime Limited