Seco-Larm Enforcer Magnetic Contact, 3/8" Stubby Press Fit, 3/8" Gap
A Switch That Was Built To Last
The Seco-Larm Enforcer Magnetic Contact, 3/8" Stubby Press Fit, 3/8" Gap is a closed loop contact switch for closed loop applications.
- Switch/magnet case with ribs for securing in holes
- Perfect for snaking and splicing in the field
- Moisture and corrosion resistant with epoxy compound enclosure
- High-impact plastic case for enhanced durability
Rugged, Long-Lasting Construction
Seco-Larm contacts have a unique rhodium plating which has gone through a special oxygen treatment to deactivate the surface, thus eliminating the absorption of organic impurities, polymer growth during operation, and the possibility of contact freezing.
The switch is housed in weatherproof die-cast aluminum constructed for surface-mounting on a garage floor. It can withstand heavy vehicle pressure without damage. The switch is safely enclosed in an epoxy compound, and a 24-inch flexible stainless-steel cable gives complete protection to the switch wiring.
The magnet is enclosed in an epoxy compound inside a round-backed aluminum housing, which mounts directly to the garage door. Its special shape discourages using the housing as a foothold when closing the door, and offers no projecting edges to catch when the door is raised.
Seco-Larm Security Products
So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Under the Enforcer trademark, Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether for physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers such an extensive range of dependable, cost-effective security products with a full program of service and support.
- Gap: 3/8" (10 mm)
- Magnet: 3/4-inches (19 mm)
- Wire leads: 15" (38 cm)
- Circuit: Closed
- Contact lifetime: 50 million cycles
- Rating: Up to 1A at 10VDC
- Operating Temperature: -15 to 160 degrees F (-25 to 70 degrees C)
- Listings: UL