Zipato sme.NCM750GB — Outdoor IP Camera Quick Installation Guide

Quick installation guide and specifications for the Zipato sme.NCM750GB Outdoor Wireless IP Camera — a 1.0 Megapixel HD (720p) camera designed for use with the Zipato Smart Monitoring Kit and Zipato automation network.

Overview

The Zipato Outdoor IP Camera combines HD recording with wireless and cloud connectivity, letting you view live and recorded video from any connected device. It's IP66 rated for dust and rain protection. As part of a Zipato Smart Monitoring Kit, the camera can show live/recorded video for alarm events, attach video to alerts, and participate in automation scenarios built with the Zipato Rule Creator.

Key Features

• 1.0 Megapixel HD (720p) outdoor wireless IP camera
• Dual stream, H.264/MJPEG video compression
• f=3.6mm, F2.0 lens with 1/4" HD sensor
• Day/Night surveillance mode with integrated 24 IR LED reflector (<20m range)
• Supports DDNS connection (free embedded DDNS service)
• Motion detection alarm via email, FTP, and Micro SD card
• Supports Micro SD card cycled recording
• IEEE 802.11n wireless with WEP, WPA, and WPA2 encryption
• Waterproof IP66 rating for outdoor use
• Supports ONVIF and RTSP protocols, plug-and-play function

Package Contents

• 1x IP Camera
• 1x CD
• 1x Power adapter
• 1x Mounting bracket set
• 1x RJ45 cable
• 1x Quick installation guide
• 1x Warranty card

Installation (Zipato Controller)

Note: The steps below apply only if you own a Zipato-manufactured automation controller. For general use outside the Zipato network, consult the electronic User Guide and software at cd.ipcamdata.com/en/xseries.html.

1. Connect the IP Camera to power using the provided power adapter.
2. Connect the camera to your network router with the provided Ethernet cable. Your Zipato automation controller should be joined to the same network.
3. In the Device Manager tab on the left side of the Zipato Web GUI, click "Add new device."
4. In the new window, click "IP Camera" — discovery will start automatically. The camera should appear in the device list, confirming it's added to the Zipato network.
5. Once added, click "Sync" and reload the dashboard to see the camera in the device browser.

Caution: Do not apply power to the camera before completing installation. Install a proper power cut-off device during the installation connection. Do not connect a different power supply than the one shipped with the camera — this can damage the device.

Specifications

Troubleshooting & Support

Zipato's website contains the latest documentation and software updates for Zipato products: www.zipato.com. You can also find answers at the Zipato Community (community.zipato.com) or contact Zipato Support at support@zipato.com.

Compliance

This device complies with FCC Part 15 Class B limits and CE harmonized standards under the EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and R&TTE Directive 1995/5/EC. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.

Warranty

Zipato products carry a Limited Product Warranty (typically one year for this product type) covering material defects in materials and workmanship under normal use, provided the product is used and serviced per the manual. The warranty does not cover damage from unauthorized alterations, misuse, improper handling, fire, water, or other catastrophic events. See zipato.com for full warranty terms and current coverage details.