Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    XP Series X10 PRO Keypads — XP1, XP2, XP4 Reference Guide

    September 08, 2026 2 min read

    Reference guide for the XP Series X10 PRO Keypads (XP1, XP1A, XP2, XP2D, XP4, XP4A, XP4D) that attach to an XPT Wall Controller base.

    💾 Download Original PDF
    Full text manual (for reference)

    Reference guide for the XP Series X10 PRO Keypads (XP1, XP1A, XP2, XP2D, XP4, XP4A, XP4D), which snap onto an XPT Wall Controller base to provide various one-, two-, and four-button lighting/device control solutions.

    Overview

    The XP Keypads are designed to operate when attached to an XPT Wall Controller. There are seven Keypad options, allowing multiple control solutions from various locations.

    Note: The XPT, with a Keypad, does not switch any loads — it is a transmitter only.

    Installation

    Place the desired Keypad cover onto the XPT Base by inserting the tab on top of the Keypad under the notch on the XPT Base. Gently, but firmly, press the bottom of the Keypad into place so the pins on the back of the Keypad insert into the XPT Base socket.

    Keypad Models

    Model Description
    XP1 One Button Keypad. A single rocker allows ON/OFF control of any X-10 PRO device set to the same House and Unit code as the XPT Base Transmitter.
    XP1A One Button Keypad (All Lights). A single rocker allows ALL LIGHTS ON control of any X-10 PRO light control device set to the same House code, and ALL UNITS OFF control of any X-10 PRO device on that House code.
    XP2 Two Button Keypad. Two rockers send sequential ON/OFF X-10 PRO commands — the first uses the Unit Code set on the XPT Base, the second the next sequential code.
    XP2D Two Button Keypad (with Dimming). Two rockers send a single ON/OFF X-10 PRO command plus a BRIGHTEN/DIM for the same command — for modules with dimming capability.
    XP4 Four Button Keypad. Four rockers send sequential ON/OFF X-10 PRO commands, starting at the XPT Base Unit Code and continuing three sequentially above.
    XP4A Four Button Keypad (with All Lights). Sends three sequential ON/OFF commands plus an ALL LIGHTS ON/OFF command to the matching House Code.
    XP4D Four Button Keypad (with Dimming). Sends three sequential ON/OFF commands plus a BRIGHTEN/DIM for the last command — for modules with dimming capability.

    Manufacturer

    Tampa, FL 33618 — Technical Support: 800-832-4003