Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    X10 XPFM — Single Pole Fixture Module Instructions

    August 31, 2026 2 min read

    Installation instructions for the X10 XPFM Single Pole Fixture Module, a 15A incandescent and inductive non-dimming ON/OFF fixture module for recessed lighting cans and single-gang boxes.

    💾 Download Original PDF 🛒 View Product
    Full text manual (for reference)

    Overview

    The X10 XPFM Single Pole Fixture Module is an incandescent and inductive non-dimming fixture module designed to control 15A loads ON and OFF. It's small enough to fit inside recessed lighting cans and single-gang boxes, allowing hardwired control from inside the fixture itself.

    Specifications

    • Rating: 120VAC, 15AMP
    • For use only in fixtures where 60°C wiring is permitted
    • Maximum ambient operating temperature: 140°F (60°C)
    • Responds to ON/OFF and ALL LIGHTS ON / ALL UNITS OFF commands — does not respond to DIM commands

    Installing the Single Pole Fixture Module

    1. Shut off power at the circuit breaker.
    2. Identify the leads from the fixture (Line and Neutral).
    3. Interrupt the 120VAC line that had supplied power to the fixture, then connect the Blue (Switch Leg) lead from the XPFM to the fixture as Line.
    4. Connect the Black (120VAC, Line) lead from the XPFM to 120VAC.
    5. Connect the White (Neutral) lead to Neutral.
    6. Clean the mounting surface, remove the protective covering from the adhesive tape on the back, and press firmly in place.
    7. Check that all connections are tight and no bare conductors are exposed.

    Setting Up the Module

    • Set the House Code dial (RED) to the same letter set on the controller or Security Console. The House Code for monitored security consoles is downloaded by the security installation firm; the default House Code is ‘A’ when using the PRO2000.
    • For normal lighting control, set the Unit Code dial (BLACK) to an unused code, controllable from the controller or an RF remote such as the Security Remote (PSR01, switches 1–4 control Unit Codes 1–4).
    • To use as a security light, set the Unit Code to match the security console's Unit Code (downloaded by the security installation firm; default is ‘13’ when using the PRO2000).

    Note: the security light is the light flashed on/off during an alarm, controlled by the security LIGHT ON and LIGHT OFF buttons on the PRO2000 console, keychain, and security remotes.

    Manufacturer

    X10 Wireless Technology. Tampa, FL 33618. Technical Support: 800-832-4003.