X10 SR227 — Wall Receptacle Module Installation Instructions

Installation instructions for the X10 SR227 Wall Receptacle Module — a split-outlet wall receptacle with one X10-controlled outlet and one always-on outlet.

Overview

The SR227 Wall Receptacle Module is designed to control unrestricted loads up to 15 Amps. It has two outlets: the upper one is X10-controlled, and the lower one is always on. The SR227 does not respond to "All Lights On."

Installation

1. Turn the power off at the circuit breaker panel.
2. Remove the wall plate and unscrew the old receptacle from its box.
3. Disconnect the wiring to the old receptacle.
4. Connect the black wire on the SR227 to Live (black wire), connect the white wire on the SR227 to Neutral (white wire), and connect the green wire on the SR227 to ground (or to a metal wall box) using the provided wire nuts.
5. Refit the SR227 in the wall box and finish off with the provided trim plate.
6. Turn the power back on at the circuit breaker panel.

Setting Up the SR227

• Using a small screwdriver, set the black Unit Code dial to an unused code that can be controlled from your X10 Controller(s).
• Set the red House Code dial to the same letter as your X10 controller(s).
• Plug an appliance (or a lamp) into the top outlet.

Testing the SR227

Make sure the lamp/appliance's switch is on. Plug an X10 Controller into the bottom outlet. Press the On and Off buttons on the Controller that correspond to the Unit Code setting on the SR227. If the lamp/appliance turns on and off, you can unplug the Controller and move it to its permanent location. If it doesn't work, try the Controller in different outlets. You can also cycle the load off then on (local control/sense) to turn the SR227 on.

Related X10 Products

• Mini Timer MT13A — A controller, timer, and alarm clock all in one. Programs up to eight X10 modules to go on/off at specific times, up to 64 timed events total. Dims lights too.
• Maxi Controller SC503 — Control up to 16 X10 modules at the touch of a button from anywhere in the house. Dims lights too.
• Mini Controller MC10A — Control up to eight X10 modules from anywhere in the house. Dims lights too.
• 2-Way Home Control Interface CM15A — Set up from a PC to control up to 256 X10 modules. Includes ActiveHome Pro software download and USB cable.
• Thermostat Set-Back TH2807 — Automatically sets back your central heating/air conditioning. Mounts on the wall under your existing thermostat and plugs into an Appliance Module.
• Wireless Remote Control System RC5000 — Control 16 X10 modules from inside or outside the home. Can dim/brighten Lamp Modules and Wall Switch Modules. Works with the HR12A PalmPad Remote and X10 RF Wall Switches (SS13A, SS15A).
• Lamp Module LM465 — Dims/brightens from any X10 Controller, responds to "All lights on." Rated 300W incandescent only. 2-Way version: LM14A.
• SocketRocket LM15A — Screws into an existing light fixture; controls up to 150W, incandescent only.
• Appliance Module AM486/AM466 — 2-pin polarized (AM486) or 3-pin grounded (AM466), for controlling an air conditioner, TV, stereo, etc. Rated 15A for heaters/coffee pots, 1/3 H.P. for motors, 400W for TVs, 500W for lamps. 2-Way versions: AM14A (2-pin), AM15A (3-pin).
• Wall Switch Module WS467 — For controlling important indoor/outdoor security lights. Replaces an existing wall switch and installs like a regular dimmer. Rated 500W incandescent only.
• 3-Way Wall Switch Module WS4777 — For controlling a light controlled by two switches; same features as WS467.
• Universal Module UM506 — Isolated contact relay and beeper, settable for momentary or continuous operation. Not compatible with X10 security systems.

Warranty

X10.com, a division of X10 Wireless Technology, Inc. (X10), warrants X10 products to be free from defective material and workmanship for a period of 90 days from the original date of retail purchase. X10 agrees to repair or replace, at its sole discretion, a defective product if returned within the warranty period with proof of purchase.

If service is required:

1. Visit www.x10.com/support/return_policy.htm or email sales@x10.com to obtain a Return Merchandise Authorization (RMA) number.
2. Return the defective unit postage prepaid to X10.
3. Enclose a check for $4.00 to cover postage and handling.
4. Enclose a dated proof of purchase.

X10 is not responsible for shipping damage — units to be returned should be packed carefully. Visit www.x10.com/support for help.

X10 Wireless Technology, Inc., 400 Forge Way, Suite 409-412, Rockaway, NJ 07866. www.x10.com