X10 KR19A — SlimFire Remote Installation & Operating Instructions

Installation and operating instructions for the X10 KR19A SlimFire™ Remote — a wireless remote control for X10 lighting and appliance modules, used with the TM751 Transceiver.

Overview

The KR19A works with the TM751 Transceiver (sold separately). It lets you turn on/off two individually coded X10 Modules and brighten/dim lights connected to Lamp Modules and Wall Switch Modules. In the default state (after first fitting the battery), the KR19A is set to Housecode A. The first (top) two ON/OFF buttons control modules set to Unit Code 1; the second (middle) two buttons control Unit Code 2.

Basic Setup

1. Plug in an X10 TM751 Transceiver (sold separately).
2. To turn on/off X10 Modules set to Unit Code 1 (Housecode A), press the first (top) ON or OFF button. To turn on/off modules set to Unit Code 2 (Housecode A), press the second (bottom) ON or OFF button.
3. To brighten or dim Lamp Modules or Wall Switch Modules, press the number button first, then press the Bright or Dim button.

If you only want to control Modules 1 and 2 on Housecode A, no further setup is required.

Changing the Housecode

1. Press and hold the first (top) ON and OFF buttons together for 2–3 seconds to enter Program Mode (the LED stays on).
2. Press and release the first (top) ON button the appropriate number of times for the desired Housecode — once for A, twice for B, etc. The LED blinks off for each press.
3. Press the second (bottom) ON or OFF button to return to Normal Mode. The unit also returns to Normal Mode automatically if no keys are pressed for more than 30 seconds.

Changing the Unit Code

This changes the Unit Code for the first (top) two buttons — the second pair of buttons is always one number higher than the first pair (e.g., if the first button is set to 6, the second button controls 7).

1. Press and hold the first (top) ON and OFF buttons together for 2–3 seconds to enter Program Mode (the LED stays on).
2. Press and release the first (top) OFF button the appropriate number of times for the desired Unit Code — once for 1, twice for 2, etc. The LED blinks off for each press.
3. Press the second (bottom) ON or OFF button to return to Normal Mode (or wait 30 seconds of inactivity).

Battery Replacement

Pry the unit apart and fit a CR2025 3V Lithium battery, observing correct polarity.

Regulatory

This device complies with Part 15 of the FCC Rules. Operation is subject to: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. No changes or modifications may be made to the units — any changes will void the user's authority to operate the equipment.

Warranty

X10.com, a division of X10 Wireless Technology, Inc., warrants X10 products to be free from defective material and workmanship for 90 days from the original date of retail purchase. X10 agrees to repair or replace, at its sole discretion, a defective product returned within the warranty period with proof of purchase.

To request service under this warranty:

1. Call 1-800-675-3044, email sales@x10.com, or visit www.x10.com to obtain a Return Merchandise Authorization (RMA) number.
2. Return the defective unit postage prepaid to X10.
3. Enclose a check for $4.00 to cover postage and handling.
4. Enclose a dated proof of purchase.

X10 is not responsible for shipping damage — units returned should be packed carefully. Complete online warranty registration at www.x10.com/warranty.