STI-34601 — Wireless Doorbell Button Installation Manual

Installation and reference guide for the STI-34601 Wireless Doorbell Button, part of the STI Wireless Alert Series. Full details below cover setup, specifications, FCC compliance, and the complete list of compatible Wireless Alert Series accessories.

Features

• 500' range at 433 MHz
• Commercial and residential applications
• Streamlined, low-profile design
• ABS UV-stabilized housing material
• Low battery indicator shown on the STI Wireless Alert Series Receiver
• Powered by a CR2032 coin cell battery

Installation Instructions

1. To remove the cover, insert a screwdriver (or similar small tool) at the bottom of the cover and depress gently. Rotate until the tab disengages.
2. Insert the battery by placing it under the top battery claws, then pushing it into the bottom cradle.
3. Attach the backplate to the mounting surface with the two included #6 – 32" screws. When using wall anchors, drill 3/16" diameter holes; when using screws only, drill 3/32" diameter holes.
4. Snap the cover back onto the backplate — place the tab inside the cover slot on the backplate and rotate closed.
5. Enroll the Wireless Doorbell Button into your 433 MHz Wireless Receiver (refer to your receiver's instructions for enrollment and programming).

Specifications

Compliance Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by STI could void the user's authority to operate this equipment. This product meets applicable Industry Canada technical specifications. Intended for home and office use in all EU and EFTA member states.

Warranty & Support

Safety Technology International, Inc. warrants this product to be free of defects in material and workmanship under normal use for one (1) year from the original date of purchase. Electronic warranty form available at sti-usa.com/wc14. Technical support: 800-888-4784.

Additional Wireless Alert Series Products

• STI-34098 — Single Channel Slave Receiver
• STI-V34104 — 4-Channel Voice Receiver
• STI-34108 — 8-Channel Receiver
• STI-34188 — 8-Zone Relay Board
• STI-34101 — Solar Powered Driveway Monitor Sensor
• STI-34151 — Battery Powered Driveway Monitor Sensor
• STI-34201 — Wireless Mail Alert Sensor
• STI-34301 — Wireless Garage Sentry Sensor
• STI-34401 — Wireless Universal Alert Sensor
• STI-34501 — Wireless Door Entry Alert® Sensor
• STI-34701 — Indoor Wireless PIR
• STI-34752 — Outdoor Wireless PIR
• STI-6200WIR / STI-6200WIR4 — Wireless Fire Extinguisher Theft Stopper (with/without Receiver)
• STI-6400WIR / STI-6400WIR4 — Wireless Exit Stopper Door Alarm (with/without Receiver)
• STI-6517A/B/C/D — Wireless Stopper Station Shield variants (Sound, Sound+Transmitter, Wireless Transmitter, Button Sound+Transmitter)
• STI-30105 — Extended Antenna
• STI-34105 — Voltamax 12VDC (500mA) Power Supply
• STI-34106 — Keyfob
• STI-34109 — Repeater