Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    Sonic Alert SB200SS — LED Alarm Clock with Vibrator Operation Instructions

    September 08, 2026 2 min read

    Operation instructions for the Sonic Alert Sonic Boom Travel & Bedside Alarm Clock with Bed Shaker (Model SB200SS), covering time/alarm setup, snooze, and bed shaker use.

    💾 Download Original PDF 🛒 View Product
    Full text manual (for reference)

    Operation instructions for the Sonic Alert Sonic Boom Travel & Bedside Alarm Clock with Bed Shaker (Model SB200SS) — an LED alarm clock with vibrator, designed for the hearing impaired or heavy sleepers.

    Features

    1 Alarm indicator 8 On/Off Vibrator Buzz switch
    2 PM indicator 9 Hour button
    3 Snooze button 10 Minute button
    4 Volume control 11 Tone control
    5 Alarm Set/Off button 12 Display Hi/Lo
    6 Time Set button 13 AC 9V input
    7 Alarm Off button 14 Vibrator input

    Setting the Correct Time

    1. Press and hold the TIME button while pressing the HOUR button to advance the clock display rapidly until the correct hour is shown.
    2. Press and hold TIME while pressing the MIN button to advance to the correct minute.
    3. A lighted dot in the upper left of the display indicates PM; no dot indicates AM.

    Setting the Alarm Time

    1. Follow the same steps as "Setting the correct time," but press the AL SET button (5) instead of the TIME button.
    2. Confirm the alarm time is set correctly for AM/PM — the lighted dot indicates PM. Release HOUR and MIN buttons before releasing the ALARM button.

    Snooze Operation

    Press the SNOOZE button (3) after the alarm sounds. The alarm turns off for 9 minutes, then resumes. This cycle can be repeated up to a maximum of 59 minutes.

    Alarm Mode Selection

    Set the desired alarm time, then slide the VIB/BUZZ selector (8) to the desired position:

    • VIB/BUZZ — both vibrator and sound
    • VIB — vibrator only
    • BUZZ — sound only
    • OFF — alarm disabled

    Tone & Volume

    Adjust tone pitch (11) by rotating the tone wheel on the top right-hand side, left to right. Adjust volume (4) via the wheel on the front right-hand bottom corner — higher number = louder.

    Bed Shaker (Vibrator)

    1. Attach the bed shaker's input jack to the back of the clock at the VIBRATOR input.
    2. Slide switch (8) to the desired vibrator position.
    3. Place the vibrator under the mattress or pillow.

    Power & Battery Backup

    Attach the AC power supply to the AC-9V IN jack on the back of the clock, next to the VIBRATOR input. For battery backup, install a 9-volt alkaline battery (not included) under the left-side battery access cover.

    General Specifications

    • Power: 110 Volts, 8 watts consumption, 60Hz
    • UL listed transformer

    Warranty & Support

    Sonic Alert Inc., 1050 E. Maple Road, Troy, MI 48083 · 1-800-566-3210 V/TTY · www.SonicAlert.com