0

Your Cart is Empty

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

  • Skylink WS-100 — Wireless Remote Control Manual

    September 08, 2026 2 min read

    User manual for the Skylink® WS-100 Wireless Remote Control plug-in outlet and keychain transmitter kit.

    Full text manual (for reference)

    User manual for the Skylink® WS-100 Wireless Remote Control kit — a plug-in receiver and keychain transmitter combo that lets you switch any electrical appliance on or off remotely, indoors or outdoors, without rewiring.

    What's Included

    • Keychain transmitter with 12-volt alkaline battery installed
    • Plug-in receiver

    Installation

    Indoor Use

    Plug the receiver fully into a grounded electrical outlet. If you don't have a grounded outlet, contact an electrician to upgrade your electrical system.

    Outdoor Use

    Plug the receiver fully into an outdoor outlet. Let the receiver hang downward so moisture doesn't accumulate in the outlet — install the cord and unit above ground level with the receptacle facing down. A weather-protective cover is required to keep rain or moisture out.

    Note: not for water immersion or direct exposure to water. Store indoors when not in use. National/Canadian Electrical Code (and most local codes) require outdoor outlets be protected by a Ground Fault Interrupter (GFI).

    Plug the appliance you wish to control into the outlet on the bottom of the receiver. Do not exceed the maximum load specifications listed below — check with an electrician if you're unsure of an appliance's rating.

    Operation

    Press the transmitter button — the light on the transmitter turns on, and the connected device should turn on immediately. Press the button again to turn the device off.

    Battery Replacement

    Uses a 12-volt alkaline battery (Type 23A). Open the battery compartment cover and swap the old battery for a new one. Do not dispose of batteries in fire — they may explode or leak.

    Caution

    Risk of electric shock — do not use with an extension cord or near water where water may accumulate. Keep plugs and receptacles dry. For use only on GFCI-protected circuits.

    Specifications

    Spec Value
    Range Up to 100 feet
    Input 120VAC 60Hz
    Max Load — Resistive 8A (960W)
    Max Load — Incandescent 300W
    Transmitter Battery 12-volt alkaline (Type 23A)

    FCC Compliance

    This device complies with Part 15 of the FCC Rules. Operation is subject to: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment. Skylink is not liable for misuse or application of this product beyond its intended use.

    Warranty

    One-year limited warranty from date of purchase against defects in workmanship or materials (excluding battery) — repair or replacement without charge. Proof of purchase is required.