Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    SECO-LARM SH-532BQ Multi-Tone Door Chime — Manual

    August 31, 2026 2 min read

    Installation and operating manual for the SECO-LARM Enforcer SH-532BQ flush-mount multi-tone chime.

    💾 Download Original PDF 🛒 View Product
    Full text manual (for reference)

    Full instruction manual for the SECO-LARM ENFORCER® SH-532BQ Multi-Tone Chime, a flush-mount wall chime with selectable fading, single-tone, and dual-tone sounds for up to three separate trigger inputs.

    Specifications

    • Power: 12~24 VDC
    • Sound output: 80~88 dB, adjustable via onboard potentiometer
    • Current draw: 130mA @ 12VDC
    • Housing: Flush-mount, white plastic case; fits a standard single-gang wall box
    • Dimensions: 4-5/8" x 2-15/16" x 1-9/16" (117 x 75 x 39 mm)
    • Tones: Fading tone, single tone, dual tone — selectable in any combination via DIP switches

    Parts List

    • 1x Multi-tone Chime
    • 2x Screws
    • 2x Plastic wall anchors
    • 2x Screw covers
    • 1x Manual

    Installation

    1. Run the respective wires to a backbox and connect the wiring per the Wiring Diagram (Negative/Positive power leads to the "−"/"+" terminals; trigger wires to Input 1, Input 2, and/or Input 3 as needed).
    2. A single trigger may be connected to one or more of the three trigger inputs, depending on the tone desired. If connected to multiple inputs, two of the respective tones will sound in this order: Input 1 – fading tone, Input 3 – dual tone, Input 2 – single tone.
    3. Alternatively, connect multiple separate triggers, each to a single trigger input, for a distinct tone per trigger.
    4. Set the DIP switches to choose the tone settings (see DIP Switch Settings table below).
    5. Adjust the volume using the potentiometer on the back of the chime.
    6. Using the included screws, install in the backbox, taking care not to crimp the wires.

    DIP Switch Settings

    Switch Position SW 1 ON SW 1 OFF
    SW 2 (Input 3) ON Continuous —
    SW 2 (Input 3) OFF Sounds 3x Sounds 1x
    SW 3 (Input 2) ON Continuous —
    SW 3 (Input 2) OFF Sounds 3x Sounds 1x
    SW 4 (Input 1) ON Continuous —
    SW 4 (Input 1) OFF Sounds 3x Sounds 1x

    Related SECO-LARM ENFORCER Products

    • SH-521RQ – Flush-mount Dual-tone Wall Siren (6~14 VDC, 100dB, 550mA@12VDC)
    • SH-525SQ – Surface-mount Dual-tone Wall Siren (6~14 VDC, 100dB, 550mA@12VDC)
    • SH-901RQ – Flush-mount Wall Speaker (15W, 6~8 Ω impedance)
    • SH-905SQ – Surface-mount Wall Speaker (15W, 6~8 Ω impedance)
    • SH-512BQ – Flush-mount Single-tone Chime (10~30 VDC, 105dB, 10mA@12VDC)
    • SH-532L – Surface-mount Three-tone Siren (12VDC, 124dB, 1A@12VDC)
    • SH-506Q – Miniature Electronic Buzzer (3~28 VDC, 93dB)
    • SH-504Q – Miniature Electronic Buzzer (5~15 VDC, 91dB)

    Warranty

    This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for one (1) year from the date of sale to the original customer.

    SECO-LARM's policy is one of continual development and improvement; SECO-LARM reserves the right to change specifications without notice and is not responsible for misprints.