SECO-LARM SD-9463-KSVQ — Outdoor Wave-to-Open Sensor with Manual Override

Specifications for the SECO-LARM ENFORCER SD-9463-KSVQ Outdoor Double-Gang Wave-to-Open Sensor with Manual Override (English faceplate) — a no-touch IR exit sensor with a manual override button for use during power failures, suitable for outdoor and hygiene-sensitive applications.

Overview

This full-featured exit plate uses IR technology to allow egress from a protected area, or to activate a device, with a simple wave of the hand — no touch required. That makes it well suited for hospitals, clinics, labs, cleanrooms, schools, factories, or offices where cross-contamination is a concern. The built-in manual override button keeps the door operable during a power failure.

Key Features

• Clean, no-touch operation reduces cross-contamination risk
• Adjustable sensor range up to 7" (18cm)
• Weatherproof (IP65) for outdoor use, when properly installed
• 1.2A relay, adjustable duration 0.8~30 seconds or toggle
• Manual override button functions during a power failure (pre-wired from the factory)
• LED-illuminated sensor area for easy identification
• Selectable LED colors — switches from red to green (or green to red) on activation
• Stainless steel plate

Specifications

Wiring

Purple wire = N.O., Green wire = N.C. The manual override button is pre-wired from the factory.

Also Available (Wave-to-Open Sensor Family)

Also available with European faceplate in English, Spanish, and French models. For the full line of OEM/private-label infrared sensors, contact SECO-LARM.

Warranty & Notes

SECO-LARM's policy is one of continual development; specifications and pricing are subject to change without notice, and SECO-LARM is not responsible for misprints.