Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    SECO-LARM CBA Wireless Outlet Controller (LS-xxxA-14Q) — User Manual

    August 31, 2026 3 min read

    User manual for the SECO-LARM CBA Wireless Outlet Controller kits (LS-313A-14Q, 3 outlets; LS-525A-14Q, 5 outlets) — installation, pairing, and troubleshooting.

    💾 Download Original PDF
    Full text manual (for reference)

    Overview

    The SECO-LARM CBA Wireless Outlet Controller (LS-313A-14Q / LS-525A-14Q) lets you wirelessly control lamps, appliances, or other devices plugged into included Wireless Outlets, using a compact RF remote. The LS-313A-14Q kit includes 3 outlets and 1 remote; the LS-525A-14Q includes 5 outlets and 2 remotes.

    Features

    • Wirelessly control devices, appliances, or lamps up to 100ft (30m) away (line-of-sight; actual range varies by environment).
    • Energy saving — the Wireless Outlet draws zero power when off.
    • Easily expand to multiple devices by pairing to different channels or remotes.
    • Control multiple outlets with one button, or one outlet with multiple remotes.
    • Remote is compatible with both Wireless Outlets and Wireless Light Sockets.
    • Combine several kits for further expansion.
    • For indoor use only.

    Specifications

    Spec LS-313A-14Q LS-525A-14Q
    Wireless outlets included 3 5
    Remotes included 1 2
    # of remote channels 3 5
    Working voltage 120V~/60Hz
    Remote battery 12VDC (23A), included
    Max load per outlet 1200W (10A)
    Transmission frequency 433.92MHz
    Remote range 100ft (30m), line-of-sight
    Operating temperature 59°–95°F (15°–35°C)
    Wireless Outlet dimensions 2 1/8" x 3 11/16" x 1 7/16" (54x94x36mm)
    Remote dimensions 1 1/2" x 3 5/16" x 11/16" (38x84x18mm) 1 1/2" x 4 1/8" x 11/16" (38x105x18mm)

    Remote Battery Installation

    1. Slide the battery cover on the back of the remote down to reveal the battery compartment.
    2. Insert one 12V (23A) battery (included), observing correct polarity.
    3. Slide the battery cover back into place.

    Installation & Setup

    1. Each Wireless Outlet is numbered to correspond with a remote button it's paired to. Choose an outlet and plug it into a powered outlet.
    2. Plug the desired device or appliance into the Wireless Outlet.
    3. To switch the outlet on, press the corresponding remote button, or press the pairing button on the outlet directly for manual control.

    Pairing With a Remote

    1. Begin with the Wireless Outlet plugged in.
    2. Press and hold the pairing button until the LED begins to flash, then release (pairing mode stays active for 10 seconds).
    3. Press the ON or OFF button on the remote for the desired channel.
    4. Pairing succeeds when the LED on the Wireless Outlet stops flashing.
    5. Repeat for additional outlets. Outlets can be paired to the same or separate channels, and each outlet supports up to 3 pairings total.

    Clearing All Pairings

    1. Unplug any connected devices and remove the Wireless Outlet from the power outlet.
    2. Press and hold the pairing button on the outlet.
    3. While holding the pairing button, plug the outlet back into a power outlet.
    4. Continue holding until the LED flashes rapidly, then stops — all pairings for that outlet are now cleared.

    General Operation

    • Press ON to turn on all Wireless Outlets on that channel; press the corresponding OFF button to turn them off.
    • After a power outage, Wireless Outlets remain off until turned on again, reducing fire risk and saving energy.
    • Outlets can also be toggled manually via the pairing button.

    Notes & Cautions

    • Each remote button can pair with an unlimited number of Wireless Outlets, but each outlet supports a maximum of 3 pairings.
    • Avoid exposure to high temperatures and strong sunlight.
    • Avoid high-humidity areas such as bathrooms.
    • Do not exceed the maximum load of 1200W (10A).
    • Replace the remote battery if the LED becomes dim or intermittent.
    • Wireless Outlets are for indoor use only.

    Troubleshooting

    Symptom Try This
    Wireless outlet does not work Ensure the outlet is powered and any local switch is on; check for a fresh remote battery; clear the outlet's pairing and re-pair; ensure the remote is within range; ensure the outlet has good ventilation and isn't overheating; try another location.
    Short remote range Replace the remote battery; check for RF interference from other devices.

    Compliance & Warranty

    FCC ID: LS-T341Q — Q92-BH-U | LS-T541Q — Q92-BH-V. This device complies with Part 15 of the FCC Rules. Warranted against defects in material/workmanship for one (1) year from date of sale to the original customer; SECO-LARM's obligation is limited to repair or replacement of defective parts.

    Contact

    SECO-LARM U.S.A., Inc. — 16842 Millikan Avenue, Irvine, CA 92606 | Phone: (949) 261-2999 / (800) 662-0800 | www.seco-larm.com