On-Q/Legrand GF to On-Q Module Mounting Plate — Installation Sheet

Installation sheet for the On-Q GF (Greyfox) to On-Q Module Mounting Plate (P/N 364819-01) — a bracket that lets you mount two single-bay Greyfox modules, or one double-bay Greyfox module, into a standard On-Q Home structured wiring enclosure.

Description

The GF to On-Q Module Mounting Plate is designed to be installed inside an On-Q Home enclosure. It has two stationary mounting tabs on one end and two locking tabs (push-pins) on the other. Two single-bay Greyfox modules, or one double-bay Greyfox module, then attach to the plate using the module's four corner push-pins.

Installation Steps

Typically installed during "trim-out" or as an upgrade to an existing installation:

1. Place the Greyfox module(s) on the mounting plate with the push-pins seated in each corner.
2. Align the two stationary tabs on the mounting plate with the corresponding slots on the back of the enclosure.
3. Insert the tabs by angling the module away from the back of the enclosure, then sliding it forward.
4. Rotate the mounting plate and insert the built-in locking tabs (push-pins) into the corresponding holes on the back of the enclosure, pushing until they snap into place.
5. Pull lightly on the mounting plate to confirm it's properly locked in place.
6. CAT5e, coax, or power cables may be routed behind the mounting plate for a cleaner installation.

Compatible With

Designed for use with the DSL Modem Mounting Plate family (P/N 364808-11 and related Greyfox modules) inside On-Q Home structured wiring enclosures.