Leviton Evr-Green EVR30-R2C — EVSE Wi-Fi Configuration Guide

Overview

Leviton's Evr-Green® EVR30-R2C EVSE charging station supports Wi-Fi configuration for network-connected (OCPP) operation, or local plug & play / RFID-only operation without a network. Leviton has partnered with Delta Electronics, Inc., a leading EVSE supplier, to enable the charger to communicate with EV charging networks. Configuration is done via a web-based tool and transferred to the charger using a USB flash drive.

Requirements: a computer/device with a USB port, and a USB flash drive formatted FAT32 with capacity under 32GB.

Network Setup — Joining the EVR30-R2C to a Network

1. Visit www.leviton.com/evseconfig and click the Login link at the top of the page.
2. Log in to the system configurator tool at evcs.deltaww.com/configtools — email: EVconfig@leviton.com, password: Leviton1!
3. Select Start Configuration.

Step 1 — Select Model

• Product Family: Select All.
• Select model number EVMU3017MWSLV from the list.
• Click Go.

Step 2 — Network & Backend Settings

• Backend: Select OCPP
• Charger Box ID: enter a custom name
• OCPP Version: 1.5-S
• Server URL: your network provider's website (e.g. http://myexample.com)
• SSID: your Wi-Fi network name
• Wi-Fi Security Mode: your router's encryption type (check the label on your router/modem, or ask your ISP)
• Password: your Wi-Fi password
• Wi-Fi Network Mode: DHCP

Press NEXT when complete. (These settings are unique to each user's personal network.)

Step 3 — Authentication Settings

• Authentication Mode: Select OCPP (RFID/Remote Control)
• OCPP Offline Policy: Accept local list only

Press NEXT.

Step 4 / Preview — Save & Transfer Configuration

1. Click Save Configuration File.
2. Copy the file to a USB flash drive.

Uploading to the Charging Station

1. Turn on the charging station — confirm a solid green light on the EV charger.
2. Confirm the charging station is not connected to a vehicle.
3. Insert the USB flash drive.
4. When upload completes, the power and charging lights turn ON for 2 seconds.
5. Remove the flash drive — the charging station restarts automatically.

Setup is complete.

Local Wi-Fi Setup for Non-Network Charging (Plug & Play or RFID Only)

Use this path if you don't need network/OCPP connectivity — just standalone plug & play or RFID card authorization.

Step 1 — Select Model

• Product Family: Select All.
• Select model number EVMU3017MWSLV.
• Click Go.

Step 2 — Backend

Backend: Select None.

Step 3 — Authentication Mode

• Delta Card — for RFID card use only, or
• Plug and Charge — no RFID card required for authorization

Step 4 — Charging Limits

• Select your maximum charging time.
• Select your maximum charging current — must be between 6 and 30 amps, entered as a number.

Step 5 / Preview — Save & Transfer Configuration

Before inserting the USB flash drive, make sure you see a solid green light on your EV charger. Plug in your USB and click Save Configuration File.

Uploading to the Charging Station

1. Turn on the charging station — confirm a solid green light on the EV charger.
2. Confirm the charging station is not connected to a vehicle.
3. Insert the USB flash drive.
4. When upload completes, the power and charging lights turn ON for 2 seconds.
5. Remove the flash drive — the charging station restarts automatically.

Setup is complete.

Support

Leviton Manufacturing Co., Inc.
201 N Service Rd, Melville, NY 11747
Phone: 1-800-323-8920 | Fax: 1-800-832-9538
Tech Line (8:30AM–7:30PM E.S.T., Mon–Fri): 1-800-824-3005
Email: evrgreen@leviton.com
Web: leviton.com/evrgreen