JASCO 45709 (ZW4005) — Z-Wave Interchangeable Paddle In-Wall On/Off Switch Specifications

Specification sheet for the JASCO Model 45709 (ZW4005) Z-Wave® Interchangeable Paddle In-Wall On/Off Switch.

Key Features

• Turn the connected device On/Off manually or via Z-Wave remote control
• Single pole installation, or up to three 45710 (ZW2004) auxiliary switches in 2-way, 3-way, or 4-way wiring configurations
• Blue LED indicates switch location in a dark room
• Can be included in multiple Groups and Scenes
• Supports Advanced Configuration: LED status, Invert switch (for upside-down installation)
• Screw terminal installation; requires Line (Hot), Load, Neutral, and Ground wiring connections. Traveler wire required for multi-pole installation
• Uses a standard-size wall plate for single-gang installations (wall plate not included)
• Interchangeable paddle switch: white and light almond paddles included in package
• LED can be enabled/disabled manually
• Inline traveler circuit protection
• White box contractor packaging

Specifications

• Power: 120 VAC, 60 Hz
• Signal Frequency: 908.42 MHz
• Load Ratings: Incandescent — Minimum 40W, Maximum 960W; Motor — ½ HP; Resistive — 1800W
• Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module
• Operating Temperature: 32–104°F (0–40°C)
• Indoor use only
• Complies with FCC and Industry Canada regulations

JASCO Products, 10 E. Memorial Rd, Oklahoma City, OK 73114 — www.jascoproducts.com / www.easyzwave.com. Z-Wave is a registered US trademark of Sigma Designs.