GE Security 6187 SharpShooter — Industrial/Outdoor PIR Motion Sensor Data Sheet

Product data sheet for the GE Security 6187 SharpShooter® Industrial/Outdoor PIR Motion Sensor (6187CTX) — a rugged Fresnel-lens passive infrared detector built for harsh environments.

Overview

The rugged passive infrared 6187 SharpShooter detectors work well in harsh environments, including extremely cold temperatures. The unique design enables use in applications ranging from outdoors to indoor industrial plants where the sensor may be exposed to weather, dust, shock, and severe temperatures. Available as either a hard-wired (6187CTX) or wireless (618703) device.

Each 6187 unit uses a dual-element pyroelectric sensor with jumper-selectable one- or two-zone detection, plus a sequence processor combining bidirectional pulse counting and motion verification. A high-resolution Fresnel lens focuses infrared energy on the pyroelectric sensor while a separate white light filter blocks stray and reflected light.

Housed in a cast-metal housing for durability, designed to mount flat on a wall (a separate swivel bracket is available for additional flexibility). The back case is symmetrical, allowing conduit entry from bottom, left, or right (top entry is not recommended). The case and mounting screws are gasketed for water resistance. Operating temperatures range from -40 to 120°F (-40 to 50°C).

Standard Features

• Cast metal housing for rugged industrial or outdoor installations
• Water resistant and dust proof
• Operates to -40°F (-40°C)
• Includes separate swivel bracket for flexible mounting
• Also available in 3V or wireless options

Specifications

Electrical, 6187CTX

• Input voltage: 7 to 16 VDC
• Current: 8 mA typical, 10 mA maximum
• Maximum loop rating: 50 mA @ 16 VDC
• Alarm output: Fail-safe contacts with 10 ohms in series, Form C, Normally Closed and Open (SPDT)
• Tamper loop rating: 50 mA, Normally Closed

Electrical, 618703 (wireless)

• Input voltage: 2.7 to 5.0 VDC
• Current: 10 mA typical, 13 mA maximum
• Alarm output: Normally low and normally high; CMOS outputs
• Tamper loop rating: 50 mA, Normally Closed
• Mode selection: Walktest mode — tamper switch open; RF mode — approximately 2.5 minutes after tamper switch closed

Features

• Pulse count: Bidirectional, 1 event (2 pulses) or 2 events (4 pulses)
• Detection range x field of view, standard: 45 ft. (13.7 m) x 90°
• Detection range x field of view, vertical barrier: 40 ft. (12.2 m) x 90°
• Detection range x field of view, long range: 70 ft. (21.3 m) x 6°
• Mounting: Wall only / conduit entry
• Alarm duration: 2 to 5 sec. (5 to 9 sec. in 618703 RF mode)
• LED indicator: For walktest

Environmental

• Operating temperature: -40 to 120°F (-40 to 50°C)
• Humidity: 10 to 90%, noncondensing
• RFI immunity: Greater than 10 V/meter from 1 to 1,000 MHz
• Static/lightning immunity: 2.5 kV, 2 joules maximum energy impulse, 1 msec rise / 50 msec decay

Physical

• Dimensions (H x W x D): 5.13 x 5.13 x 3.30 in. (130 x 130 x 84 mm)
• Weight: 1.9 lb. (862 g)
• Construction: Dustproof, water-resistant cast metal
• Color: Off-white

Regulatory

• C-UL-US

Ordering Information