DataComm Electronics 70-0020 — Phone/Video Module Installation Sheet

Installation instructions for the DataComm Electronics Phone/Video Module 70-0020 — a 1x8 Coax / 4x10 Phone Module structured wiring panel insert combining video splitting and telephone punch-down connections.

Step 1 — Video

• Attach a female F-connector onto the cable TV service or satellite service incoming cable.
• Screw the incoming cable with F-connector to the connector marked "Input."
• Using F-connectors, terminate all coaxial leads pulled through the top knockout to the video splitter.
• Align the four mounting pins with holes in the back of the panel (uppermost position recommended) and snap into place.

Step 2 — Telephone

• Pull the telephone wires into the HCC panel from one of the side knockouts.
• Install the cable from the telephone company demarcation point to the 110 IDC block marked "From Telco."
• Install the twisted-pair cables from each location in the house to the remaining 110 IDC connectors, matching the color-coding of the wires to the colors on the 110 IDC connectors.
• Punch the wires down with an industry-standard punch-down tool, following the T568A wiring configuration.
• A RJ31X port is provided for Line 1 seizure by a security system.

T568A Line/Wire Color Mapping

Caution

• Never install telephone wiring during lightning storms.
• Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
• Never touch uninsulated wires or terminals unless the telephone line has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.

Important Instructions

• Read and understand all instructions before beginning.
• Follow all warnings and instructions marked on the product.
• Do not use this product near water (bath tub, sink, wet basement, pool, etc.).
• Save these instructions for future reference.

Only licensed professionals should install this product.

Certifications

ETL Listed. Conforms to UL STD 1863 and ANSI/UL STD 60950-1. Certified to CAN/CSA STD C22.2 No. 60950-1.