Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    Danalock Danapad V3 — PIN Code Keypad User Guide

    August 31, 2026 2 min read

    Complete user guide for the Danalock Danapad V3 wireless PIN-code keypad, covering pairing, PIN code setup, LED signal reference, and firmware upgrade.

    💾 Download Original PDF 🛒 View Product
    Full text manual (for reference)

    User guide for the Danalock Danapad V3, a wireless PIN-code keypad accessory that pairs with a Danalock smart lock or Universal Module to allow locking and unlocking a door using entered pin codes.

    Overview

    The Danapad is a battery-powered accessory keypad (4x AAA batteries) that pairs with a Danalock lock or Universal Module via the Danalock App. Once paired and set up with one or more PIN codes, it can be used to lock or unlock the door by keying in a code.

    Setup

    Add the Danapad in the Danalock App

    1. Open the Danalock App and select "Add device" in the menu tab to enroll the Danapad.
    2. Once enrolled, pair it with your Danalock: go to Menu > Accessory devices > Danapad > Pairing and select the lock you want to control with the Danapad.

    Set Up PIN Codes

    Go to Menu > Accessory devices > Danapad > Pin codes and choose to add a new PIN code. PIN codes must be between 4 and 10 digits.

    Using the Danapad

    The Danapad is ready to use once it is paired with a Danalock or Universal Module and has at least one PIN code set up.

    • Locking: Enter the PIN code followed by the lock button. A single green blink confirms success.
    • Unlocking: Enter the PIN code followed by the unlock button. A single green blink confirms success.

    Operations & LED Responses

    Operation Input Action LED Response
    Turn on Danapad Insert batteries Display lights up green
    Activate light only Press unlock button Display lights up green
    Clear input Hold unlock button Display blinks red once
    Input timeout Input clears after 10 sec with no input Display blinks red once
    Danapad lockout 5 invalid attempts causes a 2 min lockout Display blinks red 3 times
    Incorrect PIN code length Entered PIN is shorter than 4 digits or longer than 10 digits Display blinks red once

    LED Signal Reference

    LED Signal Status Indication
    Single green blink Performed operation successfully
    Single red blink Operation canceled or failed
    Long green blink Power on
    Constant orange followed by green Firmware is being updated

    Dismounting

    The Danapad can be removed from its wall mount for battery replacement or relocation; see the original PDF for the mounting bracket release mechanism diagram.

    Firmware Upgrade

    In the Danalock App, navigate to your Danapad settings and select Firmware > Upgrade firmware. Keep your phone near the Danapad for the entire firmware upgrade process.

    Manufacturer

    Danalock International ApS, Gammel Stillingvej 427C, 8462 Harlev, DK. Phone: +45 4242 8122. Email: info@danalock.com. Document: PADV3-EN-2018/09/13.