Aeotec Smart Switch 7 (ZWA023) — Z-Wave Switch User Manual

Quick start guide and safety/warranty information for the Aeotec Smart Switch 7 (Model ZWA023-A), a Z-Wave in-wall/plug smart switch rated 120V~, 60Hz, max 15A.

Specifications

• Model: ZWA023-A
• Frequency: 908.42MHz (operates 868.40–926.3 MHz depending on local restrictions)
• Input/Output: 120V~, 60Hz, Max 15A
• RF power: up to -5.68dBm ERP
• FCC ID: 2AOGIZWA023
• Certifications: Conforms to UL STD. 62368-1; Certified to CSA STD. C22.2 No. 62368-1
• Assembled in China

Quick Start — Connecting to Z-Wave

1. Plug Smart Switch 7 into a power outlet; its LED will flash blue slowly.
2. To connect Smart Switch 7 to your automation network:
   • If your gateway supports SmartStart: scan Smart Switch 7's QR code using your control system/gateway app. Once scanned, it will join your Z-Wave network automatically within 10 minutes.
   • Otherwise: set your gateway into its "add device" mode (refer to the gateway's manual if unsure), then press Smart Switch 7's Action Button 2x within 1 second — its LED will blink to indicate pair mode.
   • If your gateway supports S2 security and you want the higher security level, enter the first 5 digits of the DSK into the gateway's interface when prompted. Do not lose the DSK or remove it from the product/packaging.
3. When Smart Switch 7 successfully joins your Z-Wave network, its LED will become solid blue for 2 seconds. If the LED continues flashing blue, it was unable to join — repeat the steps above and contact support if needed.

Note: the QR code used for SmartStart inclusion and the DSK code can be found on the packaging. Do not remove or damage them.

Safety

• Intended for indoor use in dry locations only. Do not use in damp, moist, and/or wet locations.
• Follow the recommendations at support.aeotec.com/ss7 — failure to do so may be dangerous or cause a violation of the law.

Getting Help

For problems with Smart Switch 7, visit support.aeotec.com/ss7 or contact Aeotec support via aeotec.com/contact. To check gateway compatibility, see aeotec.com/z-wave-gateways. Full specifications and certifications are available at support.aeotec.com/ss7/specs.

Warranty

Aeotec provides a one-year limited warranty on this device from date of original purchase from an authorized reseller, covering defects in materials and workmanship under normal use. Warranty excludes liquid/splash damage from improper use, battery leak damage (remove batteries when not in use), open flame/heat damage, and normal wear and tear. Claims must be submitted within 30 days of a problem's manifestation, and are handled by the authorized distributor/reseller. Full warranty terms, exclusions, and liabilities are available at support.aeotec.com/warranty.

Regulatory

This device complies with FCC Part 15 rules (Class B digital device). Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Unauthorized modifications could void the user's authority to operate the equipment.

Aeotec declares that ZWA023 complies with RED 2014/53/EU, RoHS 2011/65/EU, IEC 62321:2008, EN 50581:2012, and ErP Directive 2009/125/EC No. 1275/2008 Amendment 801/2013. Full declaration text available at support.aeotec.com/ss7/doc.

California Proposition 65 WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Use only for intended purposes.

For disposal, do not dispose of as unsorted municipal waste — use separate WEEE collection facilities per local regulations.