X10 SC546A — Remote Chime Installation Instructions

Installation and operating instructions for the X10 Remote Chime, model SC546A — a plug-in chime that responds to X10 signals from a Controller or Motion Sensor.

Setup

1. Set the Housecode dial on the SC546A to the same letter as your X10 Controller (TM751, MS16A, MC10A, etc.).
2. Set the Unit Code dial on the SC546A to any unused number between 1 and 16. If using it with a Motion Sensor, set it to the same Housecode and Unit Code as your Motion Sensor (MS16A) and the same Housecode as your Transceiver (TM751).
3. Plug the SC546A into any unused AC outlet — not one controlled by a wall switch, in case the switch accidentally gets turned off.
4. To test: press the number button (on any X10 Controller) matching the Unit Code you set on the SC546A, or walk past a Motion Sensor. The Motion Sensor sends a signal to the TM751 Transceiver, which retransmits it over your house wiring to the SC546A, which then chimes.

Warranty

X10.com, a division of X10 Wireless Technology, Inc., warrants X10 products to be free from defective material and workmanship for 90 days from the original date of purchase at retail. X10 will repair or replace, at its sole discretion, a defective product returned within the warranty period with proof of purchase.

If Service Is Required

1. Call 1-800-675-3044, email sales@x10.com, or visit www.x10.com to obtain a Return Merchandise Authorization (RMA) number.
2. Return the defective unit postage prepaid to X10.
3. Enclose a check for $4.00 to cover postage and handling.
4. Enclose a dated proof of purchase.
5. X10 is not responsible for shipping damage — pack units carefully.

Complete your online warranty registration at www.x10.com/warranty.

Related X10 Products

• Mini Timer MT13A — Controller, timer, and alarm clock in one. Programs up to 8 X10 modules for up to 64 timed events; controls 8 modules instantly; dims lights.
• Maxi Controller SC503 — Controls up to 16 X10 modules from anywhere in the house at the touch of a button; dims lights.
• Mini Controller MC10A — Controls up to 8 X10 modules from anywhere in the house; dims lights.
• 2-Way Home Control Interface CM15A — PC-based control of up to 256 X10 modules; includes ActiveHome Pro software download and USB cable.
• Thermostat Set-Back TH2807 — Automatically sets back central heating/AC; mounts under your existing thermostat and plugs into an Appliance Module.
• Wireless Remote Control System RC5000 — Controls 16 X10 modules from inside or outside the home; dims/brightens Lamp and Wall Switch Modules; works with the HR12A PalmPad Remote and X10 RF wall switches (SS13A, SS15A).
• Lamp Module LM465 — Dims/brightens from any X10 Controller; responds to "All Lights On"; rated 300W incandescent only. 2-way version: LM14A.
• SocketRocket LM15A — Screws into an existing light fixture; controls up to 150W, incandescent only.
• Appliance Module AM486/AM466 — 2-pin polarized (AM486) or 3-pin grounded (AM466); controls an AC/TV/stereo, etc. anywhere in the home. Rated 15A for heaters/coffee pots, 1/3 HP for motors, 400W for TVs, 500W for lamps. 2-way versions: AM14A (2-pin), AM15A (3-pin).
• Wall Switch Module WS467 — For indoor/outdoor security lights; replaces an existing wall switch, installs like a regular dimmer. Dimmed/brightened from any X10 Controller. Rated 500W incandescent only.
• 3-Way Wall Switch Module WS4777 — For a light controlled by two switches; same features as WS467.
• Split Receptacle Module SR227 — Replaces an existing wall outlet; top outlet acts as an Appliance Module, bottom outlet is a regular outlet. Rated 15A.
• Universal Module UM506 — Isolated contact relay and beeper; momentary or continuous operation. Not compatible with X10 security systems.

Manufacturer Contact

X10 Wireless Technology, Inc., 400 Forge Way, Suite 409-412, Rockaway, NJ 07866. Call 1-800-675-3044 or email sales@x10.com, or visit www.x10.com.