0

Your Cart is Empty

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

  • Speco POEINJ 802.3af/at PoE Injector — User Manual

    September 08, 2026 1 min read

    Installation instructions and specifications for the Speco Technologies POEINJ Power over Ethernet injector.

    Full text manual (for reference)

    Installation instructions and specifications for the Speco Technologies POEINJ — an 802.3af/at Power over Ethernet injector for economically powering PoE-capable IP cameras.

    Description

    The POEINJ is an Ethernet power device that takes a data signal from a network switch and power from the included AC power cable, transmitting both over standard Cat5/5e/6 cable in a way that powers and delivers images from a PoE-capable camera.

    Installation Instructions

    1. Turn off power to the units and sources before starting. Installing the POEINJ while power is live may damage the units.
    2. Use an RJ45 network cable to connect the remote camera to the POEINJ through the P+D (Power + Data) / OUT connection.
    3. Use an RJ45 network cable to connect your network switch to the POEINJ's Data/In port.
    4. Connect the power adapter.
    5. Confirm all cables are securely and properly connected, then power on all units.

    Specifications

    Ports 1x RJ-45 Output, 1x RJ-45 Input
    Ethernet Speed Up to 10/100/1000 Mbps
    PoE Standards IEEE 802.3at/af
    Power 25.5W Max
    Operating Temperature 32°F to 131°F
    Storage Temperature -40°F to 185°F
    Operating Humidity 0% to 95% RH
    Dimensions 4.7" (W) x 2.4" (H) x 1.5" (L)
    Weight 0.5 lbs.
    Warranty 2 Years (full terms at Specotech.com)

    Speco Technologies, 200 New Highway, Amityville, NY 11701 — www.specotech.com