Skylink RP-318 — Wireless Repeater Installation Guide

Installation guide for the Skylink® RP-318 Wireless Repeater — extends the range of Skylink Household Alert sensors by receiving and re-broadcasting their signal to your receiver unit.

What's Included

• RP-318 Repeater
• AC power adapter

Setup

Power Up

1. Pry off the battery cover using a clip.
2. Insert a 9V alkaline battery into the connector wire and place it inside the battery compartment.
3. Slide the battery cover back on.
4. Straighten the antenna wire into a vertical position. Do not cut the antenna.
5. Slide the power switch to ON. The repeater is now ready to operate.

Placement

Position the repeater at least 3 feet above the ground, centrally located between the furthest sensors and the receiver unit it communicates with. Keep the area around the repeater clear of other wireless devices to avoid interference.

Testing

Activate an existing Skylink Household Alert sensor 1–2 feet in front of the repeater. When the repeater receives and repeats the signal, its red light will flash. Note: some delay in responding may be evident when repeating signals.

External Power (DC 12V)

The repeater can run on either a 9V battery or an external AC power adapter. Plug the AC adapter into the "DC JACK" position, then turn the power on.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and complies with Class B digital device limits, providing reasonable protection against interference in a residential installation — though interference in a particular installation is not guaranteed to be absent. If interference to radio/TV reception occurs, try reorienting the receiving antenna, increasing separation between the equipment and receiver, plugging into a different circuit, or consulting a qualified technician. Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.

Warranty

One-year limited warranty from date of purchase against defects in workmanship or materials (excluding battery) — repair or replacement without charge. Proof of purchase and a Return Authorization are required.

Customer Service

Skylink Group · 17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 · support@skylinkhome.com (reply within 24 hrs) · 1-800-304-1187 (Mon–Fri, 9am–5pm EST) · Fax +800 286-1320 · www.skylinkhome.com