Skylink R3R — Garage Door Receiver Manual

Manual for the Skylink R3R Garage Door Receiver — a universal receiver designed to operate most garage door and gate operators, with an operating voltage of 12V to 24V AC or DC.

Installation

1. Wiring connection: Red wire connects to 24V, white wire connects to common, black wire is the relay output (connects to relay).
2. Antenna wire: Do NOT remove the gray antenna wire — keep it upright to receive signals from the transmitter.
3. Learn button: Used to program or erase a transmitter.
4. Red LED light status:
   • Stays on — receiver is powered
   • Flashes slowly — learning a transmitter
   • Flashes rapidly — erasing learned transmitter(s)

Programming a Transmitter to the Receiver

You can program up to 6 single-button remotes to the receiver.

1. Ensure power is connected and the red LED is on.
2. Pry off the bottom cover, press and release the Learn button on the receiver — the red LED flashes slowly.
3. Press the desired button on the remote you want to program.
4. The receiver's red LED stops flashing and stays on, indicating programming is complete.
5. Repeat to program another transmitter.
6. Put the bottom cover back on.

Erasing Transmitters from the Receiver

To erase an unwanted transmitter, all programmed transmitters must first be erased, then reprogram each one you wish to keep.

1. Program the remotes you want to use to the receiver (so you know their codes).
2. Press and hold the Learn button for 6 seconds — the red LED flashes rapidly, indicating all learned remotes have been erased. Release the button.
3. Program the remotes you want to use back to the receiver.

Accessories

Skylink offers Keychain Transmitter Models R3-T4 and R3-T2 compatible with this receiver — visit www.skylinkhome.com for details.

Warning

To prevent possible serious injury or death from a closing garage door: only activate the door when it can be seen clearly, is properly adjusted, and there are no obstructions to travel. Always keep the garage door in sight until fully closed — never let anyone cross the path of a closing door.

Warranty

One year warranty against defects in workmanship or materials (excluding battery) from date of purchase — repaired or replaced without charge with proof of purchase and a Return Authorization.

Customer Service

Skylink Group, 17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3. Phone: 1-800-304-1187 (Mon–Fri, 9am–5pm EST). Email: support@skylinkhome.com. Website: www.skylinkhome.com