Sensaphone FGD-0101-TEF — Ultra Low Temperature Sensor Manual

Instructions for the Sensaphone FGD-0101-TEF Weatherproof 2.8K Ultra Low -85°C Temperature Sensor with Teflon Wire Probe. Ships with 12 feet of 12-gauge wire and mounting hardware.

Compatible Models

400, 800, 1400, 1800, 2800, IMS-4210-E, WEB600, CELL682, Express II, and Sensaphone 2000.

Wiring — Models 400, 800, 1400, 1800, 2800, and IMS-4210-E

The probe may be connected to any available input terminal. Refer to your unit's user manual for configuration and programming.

1. Remove any existing wiring or sensors (including local thermistor) from the input terminal.
2. Attach the wire from the weatherproof temperature probe to the input terminal and ground, respectively.

Wiring — WEB600, CELL682, Express II, and Sensaphone 2000

The probe may be connected to any available input terminal. Refer to your unit's user manual for configuration and programming.

1. Remove any existing wiring or sensors from the input terminal.
2. Place the corresponding input shunt in the 'a' position for Express II, or the TMP/DRY position for the 2000.
3. Attach the wire from the weatherproof temperature probe to the input terminal and ground, respectively.
4. Program the input type for a 2.8K thermistor, in either Fahrenheit or Celsius.

Safety Warning

Do not submerge the probe.

Support

Technical Support: 610-558-2700 or support@sensaphone.com. Sensaphone, 901 Tryens Road, Aston, PA 19014.