Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    Seco-Larm SK-2323/SK-1323 Series β€” Outdoor Keypad Quick Programming Guide Addendum

    August 31, 2026 3 min read

    Quick User Programming Guide addendum for the Seco-Larm ENFORCER outdoor stand-alone weatherproof keypad series (SK-2323 and SK-1323 lines).

    πŸ’Ύ Download Original PDF
    Full text manual (for reference)

    Quick User Programming Guide addendum for the Seco-Larm ENFORCER Outdoor Stand-Alone Weatherproof Keypad series (SK-2323-SDQ, SK-2323-SPQ, SK-1323-SDQ, SK-1323-SPQ).

    Model Overview

    Model Number Style 2 Relay Outputs Backlit Keys Proximity Reader
    SK-2323-SDQ Mullion-Style βœ“ βœ“ β€”
    SK-2323-SPQ Mullion-Style βœ“ β€” βœ“
    SK-1323-SDQ Sealed-Environment βœ“ βœ“ β€”
    SK-1323-SPQ Sealed-Environment βœ“ β€” βœ“

    Note: Products with a model number ending in β€œQ” (or bearing a round green β€œQ” sticker) are RoHS compliant. For complete programming instructions, see page 10 of the User Manual.

    Programming Tips

    • Program a new Master Code immediately after installation.
    • Program the Output #1 access mode immediately β€” otherwise the keypad will only accept user cards.
    • Keypad status LEDs: Right LED solid green = Standby; Left LED solid red / Right LED solid orange = Programming Mode; Right LED flashing orange = Awaiting code/card entry.
    • If unsure which mode the keypad is in, press # until the right LED is green (standby mode), then enter the Master Code twice to return to Programming Mode.
    • Default Master Code is 12345.

    Programming the Master Code

    1. Enter Programming Mode by entering the Master Code twice (default: 12345).
    2. Enter 3.
    3. Enter the new 5-digit Master Code twice (e.g., for 54321, enter: 5-4-3-2-1-5-4-3-2-1).
    4. Exit Programming Mode by pressing #.

    Setting the Output #1 Access Mode

    Default is User Card ONLY. To use codes, you MUST set the mode to 01 or 02. (Note: Output #1 Access Mode applies to the SK-2323-SPQ and SK-1323-SPQ, which must be programmed for these models to accept user codes.)

    1. Enter Programming Mode by entering the Master Code twice.
    2. Enter 0.
    3. Enter one of: 00 β€” User card ONLY (default); 01 β€” Either user card OR user code; 02 β€” User card AND user code.
    4. Exit Programming Mode by pressing #.

    Programming Output #1 Users

    Each Output #1 user can be programmed with a user code and/or a user card (card options apply to SK-2323-SPQ and SK-1323-SPQ only).

    User Code Only

    1. Enter Programming Mode by entering the Master Code twice.
    2. Enter a user ID number (000–999).
    3. If the left LED is red, previous user data exists β€” clear it by entering # (keypad beeps and left LED turns green).
    4. Enter a new 5-digit user code.
    5. Repeat from step 2 to program the next user.
    6. Exit Programming Mode by pressing #.

    User Card Only

    1. Enter Programming Mode by entering the Master Code twice.
    2. Enter a user ID number (000–999).
    3. If the left LED is red, clear existing data by entering #.
    4. Swipe a new user card.
    5. Return to Programming Mode by pressing #.
    6. Repeat from step 2 to program the next user.
    7. Exit Programming Mode by pressing # again.

    User Card and Code

    1. Enter Programming Mode by entering the Master Code twice.
    2. Enter a user ID number (000–999).
    3. If the left LED is red, clear existing data by entering #.
    4. Swipe a new user card.
    5. Enter a new 5-digit user code.
    6. Repeat from step 2 to program the next user.
    7. Exit Programming Mode by pressing #.

    Programming Output #2

    Each Output #2 user may only have a user code OR a user card programmed (card option applies to SK-2323-SPQ and SK-1323-SPQ only).

    Output #2 User Code

    1. Enter Programming Mode by entering the Master Code twice.
    2. Enter 4.
    3. Enter a user ID number (00–09).
    4. If the left LED is red, clear existing data by entering #.
    5. Enter a new 5-digit user code.
    6. Repeat from step 3 to program the next user.
    7. Return to Programming Mode by pressing #, then exit by pressing # again.

    Output #2 User Card

    1. Enter Programming Mode by entering the Master Code twice.
    2. Enter 4.
    3. Enter a user ID number (00–09).
    4. If the left LED is red, clear existing data by entering #.
    5. Swipe a new user card.
    6. Repeat from step 3 to program the next user.
    7. Return to Programming Mode by pressing #, then exit by pressing # again.

    Manufacturer Notice

    SECO-LARM policy is one of continual development and improvement; specifications are subject to change without notice. This addendum was current as of publication (2010).

    Manufacturer Contact

    SECO-LARM U.S.A., Inc., 16842 Millikan Avenue, Irvine, CA 92606. Tel: 800-662-0800 / 949-261-2999. Fax: 949-261-7326. Email: info@seco-larm.com. Website: www.seco-larm.com.