Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    SECO-LARM RA-4961-PBQ — CBA Wireless Pushbutton Manual

    September 08, 2026 2 min read

    Instruction manual for the SECO-LARM CBA RA-4961-PBQ Wireless Pushbutton.

    💾 Download Original PDF 🛒 View Product
    Full text manual (for reference)

    Instruction manual for the SECO-LARM CBA RA-4961-PBQ Wireless Pushbutton — a battery-powered wireless pushbutton for use with RA-4961 series receivers, doubling as a wireless doorbell with up to 1,000ft transmission range.

    Overview

    • For use with RA-4961 series receivers
    • Up to 1,000ft (305m) transmission range*
    • Easy installation
    • Can be used as a wireless doorbell

    *Transmission range will vary depending on installation and operating environment.

    Specifications

    Spec Value
    Model number RA-4961-PBQ
    Frequency 914.8MHz
    Transmission range Up to 1,000ft (305m)
    Channels 1
    Power supply CR2032 battery (included)
    Current draw Standby 0.2µA, Active 16mA
    Estimated battery life 400 days (3 triggers/day)
    Low battery indicator Zone LED on receiver blinks continuously
    IP rating IP45
    Operating temperature -4°~140°F (-20°~60°C)
    Dimensions 1-5/16" x 11/16" x 3-7/16" (34x18x87mm)

    Parts List

    • 1x Wireless pushbutton
    • 1x CR2032 battery

    Installation

    1. Remove the front cover by inserting a paperclip in the notch at the top of the unit, pushing down with force, and pulling the top of the cover off.
    2. Mount the pushbutton to a wall or surface using screws (not included) through the two mounting holes.
    3. Once mounted, snap the front cover back onto the unit.

    Pairing the Pushbutton

    1. Follow the pairing instructions for the RA-4961-K1Q receiver or RA-4961-VPQ wireless vibrating receiver to enter pairing mode (see that unit's manual for details).
    2. Press the pushbutton.
    3. The receiver beeps once and cycles to the next channel to confirm successful pairing.

    Installing the Battery

    1. Remove the front cover as described above.
    2. If a previous battery is installed, use a fingernail or small object to remove it from the holder.
    3. Slide a CR2032 battery into the holder, observing correct polarity (positive faces out).
    4. Snap the front cover back onto the pushbutton.

    Note: Low battery is indicated on the receiver — refer to the RA-4961-K1Q or RA-4961-VPQ manual for details.

    Companion Products

    Also available from SECO-LARM in the same wireless family: Wireless Outdoor PIR Sensor (RA-4961-DSQ), Wireless Mailbox/Tilt Sensor (RA-4961-MBQ), Wireless Magnetic Contact (RA-4961-MCQ), Wireless Indoor PIR Sensor (RA-4961-PRQ), Wireless Alert System (RA-4961-K1Q), and Wireless Vibrating Receiver (RA-4961-VPQ).

    FCC Compliance

    FCC ID: YAHDCX-800. This device complies with Part 15 of the FCC Rules and may not cause harmful interference; it must accept any interference received. No change to the antenna or device is permitted without voiding RF exposure compliance and the user's authority to operate the equipment.

    Warranty

    This SECO-LARM product is warranted against defects in material and workmanship for one (1) year from the date of sale to the original customer, limited to repair or replacement (SECO-LARM's option) if returned with transportation prepaid.

    SECO-LARM® U.S.A., Inc. — 16842 Millikan Avenue, Irvine, CA 92606. Phone: (949) 261-2999 / (800) 662-0800. www.seco-larm.com