SECO-LARM MVE-AN1W1-01Q — Wireless IR Repeater Kit Manual

Manual for the SECO-LARM ENFORCER MVE-AN1W1-01Q Wireless IR Repeater Kit — extends an IR remote control signal to operate audio/video equipment kept in a separate room or inside a closed cabinet, using 915MHz RF transmission with frequency-hopping to minimize interference.

Overview

The kit wirelessly relays IR signals over up to 656ft (200m) line-of-sight, letting you control gear that's out of direct remote range — behind cabinet doors, in a different room, or tucked in an equipment closet. It's compatible with 20~60 kHz IR systems, which covers the vast majority of consumer A/V remotes.

Key Features

• Wireless IR transmission up to 656ft (200m)* line-of-sight
• 915MHz RF with frequency-hopping technology to minimize interference
• Compatible with 20~60 kHz IR remote systems
• Blue IR-confirmation LED on both transmitter and receiver
• 5VDC power (two AC adapters included, one per unit)
• Compact size for easy mounting near A/V equipment
• Includes one 10ft (3m) wired IR emitter and one 5ft (1.5m) wired IR receiver

*Line-of-sight range; actual range may vary with installation and operating environment.

Parts List

• 1x Transmitter
• 1x Receiver
• 2x 5VDC power adapters
• 1x Wired IR receiver (5ft/1.5m cable)
• 1x Wired IR emitter (10ft/3m cable)
• Mounting tape for wired IR receiver and emitter
• 1x Manual

Specifications

Installation

1. Find a suitable location near an AC outlet and place the receiver facing the A/V equipment to be controlled. Plug in the unit.
2. Find a suitable location near an AC outlet and place the transmitter so the built-in IR receiver is visible to the IR remote. Plug in the unit. (The blue LED illuminates when an IR signal is received/emitted.)
3. For hidden transmitter/receiver installations, mount the wired IR receiver using the included double-sided tape in a location visible to the IR remote, then connect it to the IR receiver input.
4. Mount the wired IR emitter using one of these methods: taped directly to the IR receiving window of the controlled device; on a shelf pointing toward that window; or on the cabinet door pointing toward that window.
5. Connect the wired IR emitter to the IR emitter input.
6. Test the system to verify proper operation.

Regulatory & Warranty

FCC Compliance: FCC ID 2ACIA-TTBT004. This device complies with Part 15 of the FCC rules — operation is subject to the condition that it may not cause harmful interference and must accept any interference received. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. To comply with FCC RF exposure requirements, no change to the antenna or device is permitted.

Warranty: 2-year limited warranty against defects in material and workmanship under normal service, from date of sale to the original customer. SECO-LARM's obligation is limited to repair or replacement of defective parts (transportation prepaid by purchaser to SECO-LARM).