Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    SECO-LARM EV-N2506-2W4WQ — IP 5MP 2.8mm Turret Camera with WDR Installation Manual

    September 08, 2026 3 min read

    Installation manual for the SECO-LARM ENFORCER EV-N2506-2W4WQ IP 5MP Turret Camera with WDR.

    💾 Download Original PDF 🛒 View Product
    Full text manual (for reference)

    Installation manual for the SECO-LARM ENFORCER EV-N2506-2W4WQ — an IP 5MP turret camera with a 2.8mm lens, true Wide Dynamic Range (WDR), and AI-powered video analytics.

    Key Features

    • 1/2.7" 5MP SmartSens CMOS sensor; 30FPS at 5MP (2880x1620).
    • Tri-stream encoding: H.265, H.264, and MJPEG.
    • True Wide Dynamic Range (WDR) and 3D Digital Noise Reduction (3DNR).
    • True Day & Night function with ICR module; adjustable ICR sensitivity; corridor mode.
    • IP66 weatherproof rating; IR range up to 98' (30m) with Smart IR adjustment.
    • MicroSD/SDHC/SDXC card slot, up to 512GB, for on-board storage.
    • PoE (IEEE802.3af) or 12VDC power; ONVIF® Profile G, S, and T conformant.
    • Operating temperature: -40° to 131°F (-40° to 55°C).
    • AI functions: Human and Vehicle Detection, Perimeter Intrusion Detection, Line Crossing Detection, Stationary Object Detection, Cross Counting, Heat Map, Crowd Density Detection, Queue Length Detection, Face Detection.

    Parts Included

    1x Camera, 1x Manual, 1x Mounting Template, 1x Weatherproof Connector, 3x Mounting Screws.

    Specifications

    Type Turret camera
    Sensor 1/2.7" 5MP SmartSens CMOS
    Video encoding H.265/H.264/MJPEG
    Resolution 5MP, 2880x1620
    Backlight compensation Disable (default), Back Light, HLC, WDR
    DNR 3DNR (2DNR N/A)
    # of IR LEDs 2pcs (850nm)
    Lens / Viewing angle 2.8mm / 133°
    Minimum illumination Color: 0.1 lux at F1.2 (AGC on); 0 lux with IR on
    F Stop / Gamma correction 1.6 / Auto
    S/N ratio 39dB
    Gain control / White balance Auto / Auto
    Operating voltage 12VDC, PoE (IEEE802.3af Class 0)
    Current draw (IR off) 80mA max.
    IP Rating IP66
    Operating temperature -40° to 131°F (-40° to 55°C)
    Dimensions / Weight ø3-15/16"x3-9/16" (ø100x90mm) / 13.05 oz (370g)
    On-board storage Built-in memory card slot, MicroSD/SDHC/SDXC up to 512GB

    Important Notes

    • Do not cut the DC jack or RJ45 jack, as this will void the warranty.
    • Do not open the camera case — there are no field-serviceable parts inside.

    Installation

    1. Run a 12VDC power supply wire and an RJ45-terminated network cable through the wall to the mounting location. The 12VDC power wire is not needed if using PoE.
    2. Install and run the "Device Config Tool" on a computer connected to the same network as the camera.
    3. Press the "Search" button to locate IP cameras on the network. Default IP address is 192.168.1.168.
    4. Once found, click on the camera's IP address, or enter it manually in a browser.
    5. Configure the IP address (Dynamic or Static). Example static settings: IP 192.168.0.10, Netmask 255.255.255.0, Gateway 192.168.0.1, DNS copied from the PC's network properties.
    6. Log in with user ID "admin." On first login, you'll be prompted to set a new password. If the password is forgotten, hold the RESET button on the camera for about 10 seconds and reload the Device Config Tool.
    7. To access the camera's web interface, install the prompted Active-X web plugin.
    8. Once installed, view live video and adjust configuration settings as needed.

    For the full Web Administration manual, download it from the camera's product page at www.seco-larm.com.

    Troubleshooting

    Screen is blank Check that the camera is powered up; check the power supply's polarity; check the monitor is powered up; check the video cable connection.
    Screen image is dim Clean the lens with a soft, clean cloth; check that the light source is adequate.
    Screen image has poor contrast Adjust the monitor's contrast knob; change the position of the camera.
    Screen image flickers / is distorted Change the position of the camera.
    Camera case is hot Check that the correct power supply is in use.

    Warranty

    This SECO-LARM product is warranted against defects in material and workmanship for three (3) years from the date of sale to the original customer, limited to repair or replacement at SECO-LARM's option.