Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    SECO-LARM EV-N2506-2W4WMQ ENFORCER — IP 5MP Mini Vandal Dome Camera with WDR Installation Manual

    September 08, 2026 4 min read

    Installation manual for the SECO-LARM ENFORCER EV-N2506-2W4WMQ IP 5MP 2.8mm Mini Vandal Dome Camera with WDR, covering mounting, network setup, and troubleshooting.

    💾 Download Original PDF
    Full text manual (for reference)

    Installation manual for the SECO-LARM ENFORCER EV-N2506-2W4WMQ IP 5MP 2.8mm Mini Vandal Dome Camera with WDR — covering parts list, specifications, mounting, network setup, and troubleshooting.

    Overview

    The EV-N2506-2W4WMQ is a mini vandal dome camera featuring a 1/2.7" 5MP SmartSens CMOS sensor, 30FPS @ 5MP (2880x1620), 2.8mm lens, tri-stream encoding (H.265, H.264, MJPEG), True Wide Dynamic Range (WDR), Digital Noise Reduction (3DNR), True Day & Night with ICR module, and a full suite of AI-based smart detection functions.

    Features

    • 1/2.7" 5MP SmartSens CMOS sensor
    • 30FPS @ 5MP (2880x1620)
    • 2.8mm lens
    • Tri-stream encoding: H.265, H.264, and MJPEG
    • True Wide Dynamic Range (WDR)
    • Digital Noise Reduction (3DNR)
    • True Day & Night function with ICR module; ICR sensitivity adjustment
    • Corridor mode
    • IP66 weatherproof
    • IR range 66ft (20m); Smart IRs adjust IR strength to conditions
    • MicroSD slot (512GB max)
    • PoE (IEEE 802.3af), 12VDC
    • ONVIF® Profile G, S, and T conformant
    • Operating temperature: -40°~131° F (-40°~55° C)

    AI Functions

    • Human and vehicle detection
    • Perimeter intrusion detection
    • Line crossing detection
    • Stationary object detection
    • Cross counting
    • Heat map
    • Crowd density detection
    • Queue length detection
    • Face detection

    For the full Web Administration manual, download it from the camera's product page on www.seco-larm.com.

    Parts List

    • 1x Camera
    • 1x Mounting Template
    • 4x Mounting Screws
    • 1x Hex Key
    • 1x Manual
    • 1x Weatherproof Connector

    Specifications

    Type Mini Vandal Dome
    Sensor 1/2.7" 5MP SmartSens CMOS
    Video encoding H.265/H.264/MJPEG
    Megapixels / Resolution 5MP / 2880x1620
    Backlight Disable (default), Back Light, HLC, WDR
    DNR (2DNR / 3DNR) N/A / Yes
    AI functions Human and Vehicle Detection, Perimeter Intrusion Detection, Line Crossing Detection, Stationary Object Detection, Cross Counting, Heat Map, Crowd Density Detection, Queue Length Detection, Face Detection
    # of IR LEDs 10pcs (850nm)
    Lens / Viewing angle 2.8mm / 133°
    Minimum illumination Color: 0.1 lux at F1.2 (AGC on), 0 Lux with IR on
    F Stop 1.6
    Gamma correction / Gain control / White balance Auto
    S/N ratio 39dB
    Operating voltage 12VDC, PoE (IEEE802.3af Class 0)
    Current draw (IR Off) 80mA max.
    IP Rating IP66
    Operating temperature -40°~131° F (-40°~55° C)
    Dimensions ø4 1/2" x 3 5/8" (ø115 x 92 mm)
    Weight 18.3-oz (520g)
    On-board storage Built-in memory card slot, supports MicroSD/SDHC/SDXC up to 512GB

    Adjusting the 2-Axis Gimbal

    Move the camera vertically up and down, or rotate the camera, to change the camera lens angle.

    Camera Layout

    The mounting base houses the MicroSD card slot and a reset button. The base of the camera includes a RESET button, a ZOOM control, a CVBS/LAN port, an RJ45 Ethernet jack, and a DC power jack. The dome cover is secured with a retaining wire and cover screw. Important: Do not cut the DC jack or RJ45 jack — doing so voids the warranty.

    Before Starting

    1. Read this manual carefully and keep it for future reference.
    2. Use the camera within the given temperature and electrical limits.
    3. Do not mount in areas exposed to radiation, strong magnetic fields, or strong electrical signals.
    4. Do not point the camera at the sun — heat could damage the camera, even when not in use.
    5. Do not open or disassemble the camera; there are no field-serviceable parts inside.
    6. Do not drop the camera or subject it to strong vibrations.

    Installation

    1. Run a 12VDC power supply wire and a cable with an RJ45 jack through the wall at the location where the camera is to be mounted. The 12VDC power supply wire is not required if using PoE.
    2. Install and run "Device Config Tool" on a computer connected to the same network as the camera.
    3. Press the "Search" button to find IP cameras on the same router/network. It may take several seconds to complete. Default IP address is 192.168.1.168.
    4. Once the search completes, click the camera's IP or type the IP address manually using Internet Explorer.
    5. The camera may use Dynamic or Static IP addressing. Example static IP settings: IP Address 192.168.0.10 (last column changeable), Netmask 255.255.255.0, Gateway 192.168.0.1, DNS1/2 can copy the PC's network properties (for internet environments).
    6. Input "admin" for the user ID and password. If this is the first login, the user will be prompted to set a new password. Note: if the password is unknown, hold the RESET button on the camera for about 10 seconds and reload "Device Config Tool".
    7. To access the camera's web interface, the user will be prompted to download and install the Active-X web plugin.
    8. Once installed, the user can view live camera video and modify necessary configurations.

    For the full Web Admin manual, download it from the camera's product page on www.seco-larm.com.

    Troubleshooting

    The screen is blank Check that the camera is powered up; check that the power supply's polarity is correct; check that the monitor is powered up; check that the video cable connecting camera to monitor is properly connected.
    The screen image is dim Clean the lens with a soft, clean cloth; check that the light source is adequate.
    The screen image has poor contrast Adjust the monitor's contrast knob; change the position of the camera.
    The screen image flickers Change the position of the camera.
    The screen image is distorted Change the position of the camera.
    The camera case is hot Check that the correct power supply is in use.

    Compliance & Warranty

    This device complies with Part 15 of the FCC Rules. Users and installers are responsible for ensuring installation and configuration comply with all national, state, and local laws and codes related to monitoring and recording audio and video signals.

    California Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. See www.P65Warnings.ca.gov.

    Warranted against defects in material and workmanship for three (3) years from the date of sale to the original customer. SECO-LARM's obligation is limited to repair or replacement of any defective part, transportation prepaid.

    Manufacturer: SECO-LARM U.S.A., Inc., 16842 Millikan Avenue, Irvine, CA 92606 · Phone: (949) 261-2999 / (800) 662-0800 · www.seco-larm.com