SECO-LARM EV-N1506-2W4Q — 5MP IP Fixed Bullet Camera Manual

Manual for the SECO-LARM ENFORCER EV-N1506-2W4Q IP Fixed Bullet Camera — a 5MP PoE network camera with True Day & Night, weather-resistant housing, and ONVIF compliance.

Overview

The EV-N1506-2W4Q is a fixed bullet-style IP camera built on a 1/2.7" 5MP SMARTSENS CMOS sensor. It supports H.265/H.264 tri-stream encoding, True Day & Night switching via ICR mechanism, 3D digital noise reduction, and ONVIF Profile S/G compliance for integration with third-party NVR systems.

Features

• 1/2.7" 5MP SMARTSENS CMOS sensor
• H.265/H.264, Tri-stream IP camera
• Max. 20FPS/5MP, 1440p (2592x1944) resolution
• 12VDC or PoE 802.3af powered
• Weather-resistant (IP66) housing
• True Day & Night function with ICR mechanism
• 3D digital noise reduction (3DNR)
• ONVIF Profile S, Profile G compliant

Technical Specifications

Parts List

• 1x Camera
• 1x Security wrench
• 1x CD (Device Config Tool)
• 1x Manual
• 3x Mounting screws
• 1x DC plug with terminal block

Before Starting

• Read the manual carefully and keep it for future reference
• Use the camera within its rated temperature and electrical limits
• Do not point the camera at the sun — heat can damage it even when not in use
• Do not mount in areas exposed to radiation, strong magnetic fields, or strong electrical signals
• Do not open or disassemble the camera — no field-serviceable parts inside
• Do not drop the camera or subject it to strong vibrations

Installation

1. Run a 12VDC power supply wire and RJ45 cable to the mounting location (12VDC wire not needed if using PoE).
2. Install and run the "Device Config Tool" on a computer on the same network as the camera.
3. Click "Search" to find IP cameras on the network. Default IP address is 192.168.1.168.
4. Click the discovered camera's IP address, or type the address manually into a browser.
5. Assign a static or dynamic IP. Typical static settings: IP 192.168.0.10, Netmask 255.255.255.0, Gateway 192.168.0.1 (copy DNS from your PC's network properties for internet-connected setups).
6. Log in with default user ID and password "admin." First-time login prompts for a new password. If the password is lost, hold the RESET button on the camera for about 10 seconds and reload the Device Config Tool.
7. Download and install the Active-X web plugin to access the camera's web interface.
8. Once installed, view live video and configure settings as needed.

For the full Web Admin manual, download it from the camera's product page at www.seco-larm.com.

Troubleshooting

Warnings & Compliance

Warning: Stop using the camera if you see smoke or unusual heat — this could cause fire or electric shock. Do not open the case; there are no user-serviceable components inside.

Important: Users and installers are responsible for ensuring compliance with all national, state, and local laws related to monitoring/recording audio and video. This device complies with FCC Part 15 rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Warranty

Warranted against defects in material and workmanship for three (3) years from the date of sale to the original customer. SECO-LARM's obligation is limited to repair or replacement of defective parts, with transportation prepaid to SECO-LARM. Void if damage results from misuse, abuse, neglect, unauthorized repair/alteration, or improper installation.