SECO-LARM ENFORCER SK-919T1-GBDQ — DIP-Switch Coded Transmitter Specifications

Specifications for the SECO-LARM ENFORCER SK-919T1-GBDQ DIP-Switch Coded Transmitter (1 button, 1 channel) — a 315MHz remote transmitter designed for applications requiring large numbers of transmitters sharing identical codes.

Overview

The ENFORCER DIP-Switch Coded Transmitter uses a DIP switch to set the code, making it suitable for applications requiring large numbers of transmitters with identical codes. A secured site might want all engineers on a project to have access to the same buildings, while another working group might need access to a different set. Similarly, a gated community might want one code for all residents, with the ability to change the code if transmitters are lost or stolen.

Features

• Frequency: 315MHz (433.92MHz version also available — SK-939T1-GBDQ)
• Operates up to 500ft (150m) — actual range varies depending on installation and operating environment
• LED transmission and low battery indicator
• Includes 3VDC lithium battery (CR-2032)
• Compatible with all 315MHz SK-series receivers
• Over 68 billion (6.8 x 10¹⁰) possible codes
• Coding by 8-pin DIP switch providing 256 combinations
• Use for "block coding" or matching an existing transmitter
• Easily pocketable pendant with golden key ring
• FCC ID: K4E919T2GDW

Coding and Battery Access

1. Open the case using a coin inserted in the notch next to the key ring.
2. All DIP switches are factory preset to ON (up).
3. To set your code, move any combination of the DIP switches to OFF using a small tool, and note your choices.
4. Program your receiver to learn the code.

Specifications