Ring Power Elite Kit — Installation Guide

Quick installation guide for the Ring Power Elite Kit — a PoE (Power over Ethernet) injector that supplies power to a Ring Video Doorbell Elite over an ethernet cable run.

What It Does

The Ring Elite Power Kit takes standard ethernet input and outputs Power over Ethernet (PoE) to your Ring Video Doorbell Elite, letting a single cable carry both data and power to the doorbell.

Installation Steps

1. Install the Ring Video Doorbell Elite in your wall before performing setup in the Ring app.
2. Using the provided adapter, plug your Elite Power Kit into any wall outlet near your ethernet source.
3. Plug the 3-foot ethernet cable into the port labeled "Internet In." This cable runs from your router or ethernet switch.
4. Plug the 50-foot cable into the port labeled "To Ring Elite."
5. Run this cable to the Ring Doorbell Elite, routing it through your walls if necessary.

Once wired, complete setup for the doorbell itself in the Ring app (see the Ring Video Doorbell Elite Kit manual for full installation and app pairing steps).