Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    Ring Keypad — Basic Setup Guide

    August 31, 2026 2 min read

    Basic setup guide for the Ring Keypad, covering Z-Wave inclusion/exclusion, lifeline association, and factory reset.

    💾 Download Original PDF
    Full text manual (for reference)

    Basic setup guide for the Ring Keypad — covers adding (inclusion) and removing (exclusion) the keypad from a Z-Wave network, lifeline association, and factory reset.

    Adding the Keypad to a Z-Wave Network (Inclusion)

    The Ring Keypad can be added via Smart Start or via Classic Inclusion mode.

    Smart Start Inclusion

    1. Initiate the "add keypad" flow in the Ring Alarm mobile app and follow the guided instructions.
    2. Scan the QR code found on the keypad's packaging or on the back of the keypad.
    3. Plug the keypad into line power.
    4. When inclusion is complete, the LED on the keypad will turn solid blue, then go out.
    5. Test the keypad — any button press should beep.

    Classic Inclusion

    1. Initiate the "add keypad" flow in the Ring Alarm mobile app and follow the guided instructions.
    2. Select "Add Manually" and enter the 5-digit DSK PIN found on the keypad's packaging or via the QR code on the back of the keypad.
    3. Plug the keypad into line power.
    4. Press and hold the "1" key for three seconds.
    5. When inclusion is complete, the LED on the keypad will turn solid blue, then go out.
    6. Test the keypad — any button press should beep.

    Removing the Keypad from a Z-Wave Network (Exclusion)

    1. Initiate the "remove keypad" flow in the Ring Alarm mobile app: select the settings icon from the device details page and choose "Remove Device."
    2. Press and hold the "1" key for three seconds.
    3. When exclusion is complete, the LED on the keypad will turn solid blue, then go out.
    4. Test the keypad — button presses should no longer beep.

    Lifeline Association

    This keypad has one Association group with one node. Group 1 is a lifeline group that receives unsolicited messages relating to entry control notifications, notification reports, battery report notifications, and device-reset-locally notifications.

    Factory Reset

    Use this procedure only if the network's primary controller is missing or otherwise inoperable.

    1. Press and hold the "5" key, and using the pointed end of a paperclip, gently press and release the reset button through the reset pin hole on the back of the keypad.
    2. The red network LED in the top left-hand corner will start blinking rapidly.
    3. Wait for the red LED to stop blinking, then release the "5" key.