0

Your Cart is Empty

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

  • PulseWorx Relay Dimming — LED Troffer Dimming Solution Brochure

    September 08, 2026 2 min read

    Product brochure for PulseWorx Relay Dimming, a patented LED troffer dimming solution with no RF, PLC, or Wi-Fi required.

    Full text manual (for reference)

    Product brochure for PulseWorx Relay Dimming™ — a patented LED troffer dimming solution that requires no wireless RF, no powerline carrier (PLC), and no Wi-Fi.

    The Problem

    As office lighting transitions to LED — in both new construction and retrofits — installers and designers need an easy way to dim LED troffer fixtures smoothly, without flickering at low illumination levels, and without the cost/complexity of running new low-voltage wiring. California Title 24 requires dimming in many applications, adding pressure to solve this cheaply.

    The Solution

    Powerline Control Systems' patented Relay Dimming method uses the standard mechanical relay already inside wall switches or occupancy sensors to send messages to simple, low-cost receiver modules installed in any standard LED fixture with a 0-10V driver. Together, the switch and receiver achieve smooth dimming to any level — with no new wiring, no RF, and no programming.

    Relay Dimming Wall Switch Dimmer

    • Full-featured dimming: single-tap top = 100%, bottom = Off; double-tap top = 40%, bottom = 10%
    • Field-adjustable levels to tune for the specific site
    • No new wires means a 2-person job becomes a 1-person job
    • Bid the job without investigating wiring complexity ahead of time
    • No programming or commissioning needed — works immediately after install
    • Parts cost comparable to older, less capable low-voltage switch methods
    • Built-in occupancy sensor input
    • Supports 3-way (traveler) control using available remote switches
    • Available in White (W), Light Almond (LA), and Ivory (I)

    Receiving Module (0-10V)

    • Needs no low-voltage control wires between the control point and the fixture
    • Uses patented "relay" communication — no PLC, no RF wireless, no Wi-Fi
    • Installs in the fixture in less than 30 seconds
    • No commissioning, programming, or addressing required
    • Dimmer can only control receivers on its own controlled power circuit
    • Requires no mounting — just connect the four wires: L, N, Dim+, Dim-
    • Universal module works with 120V or 277V systems

    Ordering Information

    Product Name Part Number
    Relay Dimming Wall Switch Dimmer, 120V/277V, 15A WS-120V-X / WS-277V-X
    Receiving Module 0-10V RM-0-10V
    Remote Switch for 3-way, 120V/277V RWS-X

    Manufacturer: Powerline Control Systems, Inc. (PulseWorx) · www.pcslighting.com · 818.701.9831