Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    NuVo P200 Wireless Player — Specifications

    September 08, 2026 2 min read

    Product specifications for the NuVo P200 Wireless Player, an amplifier and streaming source component for NuVo Wireless Audio.

    💾 Download Original PDF
    Full text manual (for reference)

    Product specifications for the NuVo P200 Wireless Player — an amplifier and streaming source component for the NuVo Wireless Audio System.

    Overview

    The P200 fills a room with high-fidelity audio wirelessly, acting as both amplifier and source component. It delivers 120 watts of power and streams content from networked computers, analog sources, Bluetooth-enabled devices, and a wide range of internet-based services.

    • Uses 802.11n wireless transmission for fast signal and broad coverage
    • USB port or audio line-in for connecting any storage device
    • Lossless aptX™ Bluetooth streaming from personal devices
    • Line-out to connect to a home theater receiver or other device
    • Every zone plays and is controlled independently
    • Wireless management via the NuVo Controller or personal Apple/Android device
    • Start with one player and add more as needed
    • Access to 100,000+ internet radio stations, plus music from a networked PC or Mac
    • Audyssey™ Dynamic Volume technology optimizes the listening experience
    • High-efficiency amplifier operates coolly and saves energy

    Input/Output Connectors

    Connector Spec
    Line Input 1 — TRS 3.5mm stereo jack
    Line Output 1 — TRS 3.5mm stereo jack
    Setup Mic (Audyssey) 1 — TS 3.5mm stereo jack
    Speaker Output 4 — Gold 5-way binding post
    USB 2.0 (Type A) 1
    LAN 1 — RJ45

    Supported Audio Formats

    Music files (via USB or network): MP3, WMA, AAC, Ogg Vorbis, FLAC, WAV

    Internet Radio: Pandora®, Sirius/XM, Rhapsody, TuneIn

    IP Control: Apple iTouch®, Apple iPhone®, Apple iPad®, Android Mobile, Android Tablet

    Network Connectivity

    • LAN (wired): 10/100base-t Ethernet
    • Wireless: MIMO, 2 TX + 2 RX channels, IEEE 802.11a/b/g/n

    Amplifier Output

    Spec Value
    Rated Output Power (8 ohm) 120W (60W x 2), two channels driven 20Hz–20kHz @ 0.5% distortion
    Rated Output Power (4 ohm) 120W (60W x 2), two channels driven 20Hz–20kHz @ 0.5% distortion
    Rated Distortion (1/2 Power) 0.20%
    Speaker Impedance 4–8 ohms
    Frequency Response 20–20kHz, +/-0.5 dB
    Damping Factor 65+
    Signal-to-Noise Ratio (rated output) 92 dB A-weighted

    Audio Processing

    • Audyssey Dynamic Volume™
    • Bass Equalization: +/-12 dB range
    • Treble Equalization: +/-12 dB range
    • Balance

    Power & Environmental

    • Input voltage: 100–240 VAC, 50/60 Hz
    • Power consumption (max): 150W; (typical, 1/8 audio power): 31W
    • Operating temperature: 0°C to 40°C
    • Regulatory: Safety cTUVus, CE-LVD; EMC FCC, IC, CE-EMC, C-Tick; RoHS compliant

    Physical & Shipping Specifications

    Spec Unit Shipping
    Size 1.65"H x 9.02"W x 5.0"D (42 x 229 x 127mm) 10.24"L x 9.45"W x 2.58"H (260 x 240 x 65.5mm)
    Weight 2.45 lbs (1.11 kg) 4.41 lbs (2.0 kg)

    NuVo reserves the right to change specifications without notice. Office: 866.796.4904 or 859.817.7200 | www.nuvotechnologies.com