Nuvo NV-P30-BK — 7" Android POE Touch Screen Keypad Installation Sheet

Installation instruction sheet for the Nuvo NV-P30-BK, a 7" Android POE touch screen keypad for the Nuvo Player Portfolio multi-room audio system.

Overview

The Nuvo P30 7" Android touch screen provides instant access to the full Nuvo Player Portfolio controller application, as well as other streaming music service apps such as Spotify. It runs Android 5.1 and is powered entirely by a single 802.11af POE (Power Over Ethernet) connection supplied from a compatible POE switch or injector on the same network as the Nuvo Player Portfolio system.

Important: This installation assumes the Player Portfolio system is already installed. If not, install and configure all zones per the Player Portfolio manual before adding P30 keypads. The P30 requires a single POE (802.11af) connection and must be on the same network/subnet as the zone it is intended to control.

Panel Layout

• Front: Camera, Touch Screen, Bezel
• Rear: Power connector, Micro USB, Volume Up, Volume Down, 802.11af POE network connection

Adding a P30 to the Nuvo Player System

1. Install the mounting ring to the wall over the wire box or wire egress hole, using four fasteners appropriate to the wall surface. Ensure the Ethernet cable exits the wall in a minimum 1.5" x 1.5" (38mm x 38mm) space.
2. Connect the Ethernet cable to the P30 and place it over the mounting bracket. Launch the Nuvo Player Controller app, or download it from the Google Play Store.

Technical Specifications

Manufacturer

Legrand / Nuvo. Doc #1507263 Rev A.