Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    NAPCO StarLink SLe-GSM Communicator — Activation Guide

    September 08, 2026 2 min read

    Activation guide for the NAPCO StarLink SLe-GSM cellular alarm communicator, covering dealer account setup and primary reporting wiring.

    💾 Download Original PDF
    Full text manual (for reference)

    Activation guide for the NAPCO StarLink SLe-GSM Communicator — a cellular alarm communicator that transmits control panel alarm reports over the GSM/cellular network. This guide covers dealer account setup, radio activation, and primary wiring for basic alarm communication.

    Before Installation: Activate the Radio and Select a Service Plan

    • If your company is not yet registered as a NAPCO StarLink Dealer, go to www.NapcoComNet.com to register and create a Dealer account. Dealer accounts are approved Monday–Friday, 8:30 AM–4:30 PM; allow 1 business day for approval.
    • If your company is already registered, log in at www.NapcoComNet.com to activate the radio and select a service plan.
    • Only after the radio has been activated and a service plan selected is it ready to be installed.

    Basic Alarm Communication (Primary Reporting)

    If the installation only requires basic alarm communication (transmitting control panel alarm reports to a central station), no further configuration is required beyond activation — the radio automatically captures and transmits all alarm events to the intended central station receiver.

    1. Connect the radio to the control panel's Telco tip and ring terminals (unpolarized).
    2. Provide power to the radio via the control panel's Aux Power terminals (65mA @ 12VDC Aux Power required).
    3. See document WI1936 for the backup reporting wiring configuration if needed.

    GSM Downloading to NAPCO Gemini Panels

    If GSM downloading to a NAPCO Gemini series control panel is required, purchase the SLE-DLCBL Download Cable (6 ft.) to connect the SLe-GSM's download serial port to the control panel's serial port.

    Advanced Programming

    For advanced programming — including double reporting, backup reporting, redirecting reports to a new central station, and configuring radio inputs/outputs — go to www.NapcoNOC.com. Log in using the same credentials created for the NapcoComNet account.

    Contact Information

    NAPCO Security Systems, Inc. — 333 Bayview Avenue, Amityville, New York 11701 USA
    Sales and Repairs: (800) 645-9445 | Technical Service: (800) 645-9440
    Publicly traded on NASDAQ, Symbol: NSSC