Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    Luxul AGS-1016 — 16-Port Gigabit Switch Quick Install Guide

    August 31, 2026 3 min read

    Quick install guide for the Luxul AGS-1016 16-port Gigabit switch — desktop/rack installation, wiring, and LED status indicators.

    💾 Download Original PDF 🛒 View Product
    Full text manual (for reference)

    Overview

    The Luxul AGS-1016 is a 16-port Gigabit Ethernet switch that can be rack-mounted or used as a desktop switch. It supports 10/100/1000 Mbps Ethernet, with 10/100 Mbps half/full-duplex and 1000 Mbps full-duplex modes.

    Package Includes

    • 1x AGS-1016 16-Port Gigabit Switch
    • 2x Rack-Mounting Ears
    • 4x Rubber Feet
    • 1x Power Cable

    1. Physical Installation

    Install the AGS-1016 in a stable, safe place to avoid damage. Avoid direct sunlight, do not place heavy articles on the unit, and verify the ground connection of the outlet is functioning properly.

    Desktop/Shelf Installation

    Attach the four rubber feet to the corner indentations on the bottom of the AGS-1016, then place the switch horizontally on a solid, level platform.

    Rack Installation

    Use the included L-brackets for installation in a 19-inch server or audio/video rack. Attach the L-shaped brackets on both sides of the AGS-1016 using four screws, then install the switch horizontally in the rack using your desired mounting hardware.

    2. Connecting Ethernet and Power

    Use any RJ-45 cable to connect the AGS-1016 to an Ethernet-enabled device, including servers, routers, or other switches. No crossover cable is necessary.

    Use the included power cable to connect the AGS-1016 to a surge-protected outlet. The AC input socket and power switch are on the rear panel. The built-in power supply supports 100–240VAC at 50/60Hz.

    ⚠ CAUTION: Use only the correct power cord for your environment. Any voltage other than standard 100–240V will result in damage to the AGS-1016.

    3. Connecting Devices

    Use an Ethernet cable to connect the AGS-1016 to a device. Luxul recommends Category-5, super Category-5, or Category-6 unshielded twisted pair (CAT5/CAT5e/CAT6 UTP). For best performance and stable data transmission at 1000 Mbps, use Category-6 shielded twisted pair. The AGS-1016 automatically adjusts to the speed and duplex of the connected device.

    When a device is properly connected and powered, the Link/Activity LED for that port lights up.

    4. Connecting to a Router or Other Switch

    Use an Ethernet cable to connect the AGS-1016 to a router or other switch. The AGS-1016 automatically adjusts to the speed and duplex of the connected switch or router, so uplink cables are not necessary. When properly connected, the port's Link/Activity LED lights up.

    5. Hardware Operation

    The front panel features one Power LED and a Link/Activity LED for each port. The back panel includes 16x 10/100/1000 Mbps RJ-45 ports, a power connector, and a switch to select blue or green front-panel LEDs. Each Ethernet port has an LED indicating Link/Activity and connection speed.

    Status Indicators — Front Panel

    Indicator State Description
    Power On The AGS-1016 is switched on.
    Power Off AGS-1016 is switched off or not connected to AC power. Check power connections and the power switch on the rear of the unit.
    Link/Act On Device connected to the port.
    Link/Act Flashing Port is receiving or transmitting data.
    Link/Act Off No device connected to the port, or device is off.

    Status Indicators — Back Panel

    Indicator State Description
    Speed/Link/Act Green Gigabit device connected to the port.
    Speed/Link/Act Amber 10/100Mbps device connected to the port.
    Speed/Link/Act Flashing Port is receiving or transmitting data.
    Speed/Link/Act Off No device connected to the port, or device is off.

    Selecting Front-Panel LED Color

    Use the switch on the rear panel of the AGS-1016 to select either blue or green for the Power and System LEDs on the front panel, to best match the equipment in the rack where the switch is sharing space.

    Legal & Regulatory

    • FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
    • CE: Luxul declares that the AGS-1016 complies with the essential requirements and other relevant provisions of Directive 1995/5/EC.
    • Industry Canada (RSS-Gen Issue 4): CAN ICES-3(B)/NMB-3(B)

    Contact

    Luxul, 14203 Minuteman Drive, Suite 201, Draper, Utah 84020
    Sales: 801-822-5450 / sales@luxul.com
    Technical Support: 801-822-5450 Option 3 / support@luxul.com